Vraag & Antwoord

Videokaarten en monitoren

-= Nieuwe ATI Catalyst driver topic deel 4 =-

Anoniem
Red Dragon
79 antwoorden
  • Mooi, kan ik dus lekker zo laten. Bedankt :D
  • ik gebruik ook nog 4.12 ? updaten heeft geen zin of ? Momenteel werken alle spellen die ik speel, dus.
  • Volgens mij heeft het updaten geen zin nee omdat 4.12 de nieuwste is voor de 9000 serie. De 5.xx drivers zijn meer bedoeld voor de x800 enz.
  • Dat is niet helemaal waar, de 4 staat voor drivers uit 2004, de 5 staat voor drivers uit 2005.

    er zitten ook bugfixes voor de andere kaarten in voor bepaalde games, in de FAQ kan je de change logs lezen.
  • [quote:669cf0c0bf="Red Dragon"]Voor de R9800 is de Cat 4.12 een goeie keuze, de Cat 5.2 zou ik gebruiken met een X serie kaart, alhoewel CV met zijn X850XT volgens mij wel cat 4.12 gebruikt.

    Ikzelf gebruik gewoon Cat 5.2 werkt erg goed bij mij.[/quote:669cf0c0bf]

    Cat 4.12 zijn inderdaad het snelst, ik gebruik nu wel weer de Cat 5.2, ben klaar met testen :wink:
  • [quote:95428967e5="Jimmy"]Ik draai met Catalyst 4.6 omdat anders mijn favoriete spel (Emperor battle for dune uit 2001) heel raar gaat doen (veel artifacts met Catalyst 5.3 en 5.5). Andere spellen en 3Dmark03 werken prima op 5.5 en 4.6. Ik heb geen klachten met 4.6 (alleen 500 punten minder in 3Dmark03).

    Ligt toch niet aan mijn kaart ?[/quote:95428967e5]

    denk het niet, heb nl geen artifacts, maar hele beeld flikkert, units flikkeren als je met de muis beweegt etc… :x
    Draai hier nu 5.3 ofzo, ga binnenkort eens 5.5 proberen :)
  • 5.3 is uit, check www.ati.com

    [quote:cd8c0fa819][b:cd8c0fa819]Fixed in this driver[/b:cd8c0fa819]:
    3DMark2001: A black screen is no longer displayed when launching 3DMark2001 after launching Aquamark3, when the CATALYST™ CONTROL CENTER is installed. Topic number 737-1140
    Code Creatures: Running the benchmark under Windows XP SP2 with an ATI RADEON™ 9250 installed, and the desktop display set to either 1600x1200, 1280x1024, or 1024x768 no longer results in the ground textures appearing corrupted. Topic number 737-10108
    Pacific Fighters: Playing the game after playing any track for a short period of time and having the landscape detail set to perfect no longer results in the clouds becoming blocking when flying. Topic number 737-209
    Thief Deadly Shadows: Setting the desktop display to 1024x768 32bpp and setting the Texture Preference to High Performance in the control panel no longer results in corruption being seen at the end of the introduction movie. Topic number 737-10109
    Attempting to apply a higher refresh rate to a non-DDC monitor no longer results in the refresh rate reverting to 60hz. Topic number 737-10101
    Accessing the Problem Report Wizard option from the ATI icon in the system tray no longer results in Problem Report Wizard not being translated in the supported localized languages. Topic number 737-341
    Entering the Video option found in the Graphic Setting tab of the CATALYST™ CONTROL CENTER no longer results in the side scroll bar being missing for the secondary display device connected to an ATI RADEON™ 9800 series under Windows XP. Topic number 737-347
    The Welcome tab found in the CATALYST™ CONTROL CENTER is now completely localized for the Japanese version of Windows XP, or 2000. Topic number 737-351
    Using the CATALYST™ CONTROL CENTER to access the Display Manager no longer results in corruption being seen on top of menu text in the Dutch, French, Spanish, and Portuguese versions of Windows XP. Topic number 737-353
    The TV formats now corresponds to the country selected in the TV properties. Topic number 737-1438
    Having a CRT and TV connected to the ATI RADEON™ X850 series no longer results in the TV image quality page not being grayed out when enable video mode is enabled. Topic number 737-1439
    Launching the Hotkey Manager found in the CATALYST™ CONTROL CENTER no longer results in the Hotkey Manager window not closing when hitting the ESC key. Topic number 737-10097
    Using the CATALYST™ CONTROL CENTER to access the Display Manager no longer results in corruption being seen on top of menu text in the Dutch, French, Spanish, and Portuguese versions of Windows XP
    Entering the Video option found in the Graphic Setting tab of the CATALYST™ CONTROL CENTER no longer results in the side scroll bar being missing for the secondary display device connected to an ATI RADEON™ 9800 series under Windows XP
    Creating a profile for clone or stretch mode and attempting to change to that mode from an extended desktop mode, no longer results in the task failing to complete. Topic number 737-10098
    The Windows desktop and Full-screen video options are no longer missing when clicking the back button found in the Video Wizard of the CATALYST™ CONTROL CENTER. Topic number 737-10098
    The CATALYST™ CONTROL CENTER tool bar now displays correctly after applying a new skin and restarting the CATALYST™ CONTROL CENTER. Topic number737-10098
    Defining a custom view in the CATALYST™ CONTROL CENTER by deselecting the graphic adapter and applying the changes, no longer results in the Advanced view taking on the properties of the defined custom view. Topic number 737-10102
    The font size used in the CATALYST™ CONTROL CENTER for the Quicksilver and Steelblue skins have been readjusted in order to be seen clearer. Topic number 737-10103
    Enabling Temporal AA no longer results in a noticeable flicker on the display device. Topic number 737-10103 [/quote:cd8c0fa819]
  • [b:c721b7c61e][size=18:c721b7c61e]ATI Catalyst 5.4[/size:c721b7c61e][/b:c721b7c61e]
    Opgeloste problemen:
    [quote:c721b7c61e]Issues Resolved in CATALYST™ Software Suite 5.4

    The following section provides a summary of the issues that have been resolved in the latest version of CATALYST™. These include:

    * 3DMark2001: A black screen is no longer displayed when launching 3DMark2001 after launching Aquamark3 when the CATALYST™ CONTROL CENTER is installed
    * Pacific Fighters: Playing the game after playing any track for a short period of time and having the landscape detail set to perfect no longer results in the clouds becoming blocking when flying
    * Sail Simulator 4: Attempting to play the game under Windows XP with an ATI RADEON™ 9800 XT installed no longer results in the operating system failing to respond and rebooting
    * SolidWorks 2004: Display corruption is no longer noticed when setting the AA to 6X and AF to 16X
    * Splinter Cell Chaos Theory: Depth buffer corruption noticed on the ATI RADEON™ X800 PRO is now resolved
    * Star Wars Knights of the Old Republic: Loading the Dantooine level of the game under Windows XP no longer results in slow game performance
    * Using the ATI Problem Report Wizard under Windows XP SP2 with an ATI RADEON™ X850 XT installed no longer results in an error message appearing when clicking the Finish button for the problem report
    * CATALYST™ CONTROL CENTER: An option to select Yes or No to changes made in SMARTGART™ is now displayed when clicking the Apply button in SMARTGART™
    * CATALYST™ CONTROL CENTER: Playing a video clip in the background and entering the Overlay page found in the Video section no longer results in the default value for the Hue not being reapplied unless the CATALYST™ CONTROL™ CENTER is closed and re-launched
    * CATALYST™ CONTROL CENTER: Selecting Germany as the language no longer results in some of the text overlapping each other on the Unlock button
    * CATALYST™ CONTROL CENTER: Selecting Netherlands (Dutch) as the language no longer results in some of the text in the Hotkey manager being cut off
    * CATALYST™ CONTROL CENTER: The Bus setting information is now displayed in the Graphic Hardware section of the Information Center found
    * CATALYST™ CONTROL CENTER: The Display Manager Wizard no longer contains a Component Video single display setting message, when multi-display desktop mode is selected
    * CATALYST™ CONTROL CENTER: Custom modes can only be applied if the display device can support the mode selected
    * Attempting to apply a higher refresh rate to a non-DDC monitor no longer results in the refresh rate reverting to 60hz.
    * SXGA+ LCD panel flicker is no longer noticed when the frame buffer (UMA size) is set to 32MB or 64MB[/quote:c721b7c61e]

    Nog openstaande problemen:
    [quote:c721b7c61e]Known Issues for CATALYST™ Software Suite 5.4

    The following section provides a brief description of known issues associated with the latest version of CATALYST™. These include the following:

    * Act of War: Playing the game under Windows XP SP2 with Anti-Aliasing enabled results in display flashing being noticed. To workaround this issue, change the mouse cursor size in the game options to small.
    * Call of Duty: Corruption is noticed when playing a saved game under Windows XP with an ATI RADEON™ 9100 PRO IGP series installed and having a variety of graphic options provided by the game set high.
    * Farcry: Playing the game under Windows XP SP2 with the display set to 1024x768x32bpp along with AA disabled results in flashing textures being noticed when setting the game's video options to high detail.
    * Half-Life 2: Having the display set to 1024x768 32bpp and setting the video options in the game set to 1600x1200 and all other options set to their maximum values results in sluggish performance and missing textures.
    * Rainbow six3: Athena Sword: Playing the game under Windows 2000 with an ATI RADEON™ X700 installed results in the game failing to retain its resolution option of 1600x1200 if you Alt-tab out of the game and then Alt-tab back to the game.
    * Serious Sam: The Second Encounter: Playing the game for approximately 5 to 10 minutes under Windows XP with the game quality set at normal/default, results in display corruption being seen in the menu.
    * Star Wars Knights of the Old Republic 2: Playing the game under Windows XP with an ATI RADEON™ 9800 series installed, results in display corruption being noticed when changing the in-game options from low to maximum.
    * Star Wars Knights of the Old Republic 2: Setting the graphic option in the CATALYST™ CONTROL CENTER to Optimal Quality, followed by launching the game and setting the resolution option to 1600x1200, results in a performance drop being noticed.
    * Assigning a hotkey to increase the overlay gamma results in the hotkey not functioning properly when playing an MPEG using the Windows Media Player.
    * CATALYST™ CONTROL CENTER: The Apply button in the Custom settings of the Advanced mode found under the CATALYST™ CONTROL CENTER Video standard settings is grayed out when playing a media file.
    * CATALYST™ CONTROL CENTER: Installing the display driver and the CATALYST™ CONTROL CENTER, results in a runtime error and the system tray failing to start when attempting to create multiple user accounts and enabling fast user switching.
    * CATALYST™ CONTROL CENTER: Setting the desktop display to 800x600 or 1600x1200 16/32bpp results in the incorrect display resolution information being provided when checking the video control panel in the CATALYST™ CONTROL CENTER.
    * CATALYST™ CONTROL CENTER: Changing the DPI setting found in the General tab of the display properties to Large size (120 DPI) results in the change not taking effect when launching the CATALYST™ CONTROL CENTER.
    * Hot-plugging both a CRT and DVI display device results in clone mode failing to be applied.[/quote:c721b7c61e]
    Zal ze zo eens proberen met m'n nieuwe Asus X800 Pro.
  • Ze staan al weer 2 dagen in de FAQ, oud nieuws ;)

    http://forum.computertotaal.nl/phpBB2/viewtopic.php?p=957501#957501
  • Oeps, sorry. Ik lees niet elke dag de FAQ en aangezien dit topic nog niet bijgewerkt was. Enfin, ik heb net geprobeerd het boeltje te installeren maar na installatie kwam ik ineens niet meer verder dan 640x480x4bit. Nadien de Catalyst 5.3 drivers weer geïnstalleerd en toen geen problemen meer. Zijn er meer mensen met Catalyst 5.4 problemen?
  • Cat 5.4 zou gewoon goed moeten werken met jou X800 pro, probeer het nog eens opnieuw.
  • Ik heb 'm nogmaals geprobeerd te installeren (nadat ik de driver eveneens nogmaals heb gedownload) maar het helpt niks. De Catalyst 5.3 drivers werken feilloos maar de 5.4 drivers willen niet werken. Na het opstarten geeft het ATI Control Panel aan dat de ATI driver niet geladen is, en zo ziet het beeldscherm er op 640x480x4bit ook uit.
  • Dat is vreemd zeg, ik heb ze net getest met een X850 XT PCIe en daar had ik totaal geen problemen mee.
  • heb je de oude (5.3) drivers wel weggehaald? Just to be sure… :P

    Ik draai hier trouwens 5.3 met mijn 9600xt en dat werkt prima. :D
  • Vanzelfsprekend heb ik eerst de oude drivers verwijderd met de ATI Catalyst remover en vervolgens de 5.4 drivers geïnstalleerd. Niets lijkt te werken. Ik blijf dus voorlopig op de 5.3 drivers zitten.
  • Een update w.b. het Catalyst 5.4 probleem: ik blijk niet de enige meer te zijn, zie deze en deze draad maar eens. De mensen bij ATI zijn er inmiddels mee bezig als ik dat laatste draadje zo doorlees.
  • Zoals reeds vermeld in de FAQ (;)) zijn er weer nieuwe Catalyst drivers. Aangezien ik nu ben overgegaan op een 64-bits Windows XP, moest ik ook van drivers wisselen en nu draait alles weer perfect. Hieronder weer het vaste lijstje met fixes en todo's.

    [b:95726860f0][size=18:95726860f0]ATI Catalyst 5.5[/size:95726860f0][/b:95726860f0]
    Opgeloste problemen:
    [quote:95726860f0]Issues Resolved in CATALYST™ Software Suite 5.5

    The following section provides a summary of the issues that have been resolved in the latest version of CATALYST™. These include:

    * 3DMark05: Running the application under Windows XP for extended periods of time no longer results in the operating system failing to respond when using an ATI Radeon™ X700 PRO
    * Ashli Viewer sample Wood: Display corruption is no longer noticed when Anisotropic Filtering set to 4x or above
    * Ashli Viewer v1.6.0: Running the application under Windows 2000 and launching a sample item found in the Programs & Shaders no longer results in corruption being displayed in the sample item
    * City of Heros: Playing the game under Windows XP with an ATI Radeon™ Xpress 200 series installed no longer results in the characters in the game appearing corrupted
    * Freedom force VS The 3rd Reich: Playing the game under Windows XP with an ATI Radeon™ 8500 installed no longer results in the super hero character attributes appearing blank
    * Imperial Glory Demo: Playing the game under Windows XP with an ATI Radeon™ X800 installed no longer results in the game failing to respond
    * Star Wars Knights of the Old Republic 2: Setting the graphic option in the Catalyst™ Control Center to Optimal Quality, followed by launching the game and setting the resolution option to 1600x1200, no longer results in a performance drop being noticed
    * Star Wars Knights of the Old Republic 2: Running the Dantoonie level of the game may result in hesitation being noticed. Topic number 737-19378
    * Setting the desktop display to 800x600 or 1600x1200 16/32bpp no longer results in the incorrect display resolution information being provided when checking the video control panel in the Catalyst™ Control Center
    * Setting the display device to 1080i no longer results in the text on the custom format being illegible
    * Setting a customized resolution for 720p now works properly when maintaining the aspect ratio
    * Moving the TV to desktop2 and selecting swap device or double up no longer results in the CRT being in panning mode and display corruption being seen on the TV
    * Having a TV connected as the only display device and clicking the OK button in the ATI displays tab found in the Advanced section of the Display Properties results in a flash of the TV image being noticed
    * Connecting and enabling an HDTV and entering the properties page for the HDTV no longer results in the D3/D4 options being available in the D-Connector Control Panel
    * The occasional Windows error messages no longer occurs when booting into extended desktop under Windows XP when using an ATI Radeon™ X300 or X600
    * Corruption is no longer seen when connecting a secondary display device and moving the primary display device to the left of the secondary device, followed by disconnecting the primary display device and then reconnecting it
    * Previewing or launching the aquarium screen saver under Windows XP Media Center Edition no longer results in the operating system failing to respond
    * RF online game compatibility issue with all ATI Radeon™ series
    Launching the Catalyst™ Control Center help files from the Start->All Programs->Catalyst™ Control Center now results in the localized version of the help file being displayed
    * Catalyst™ Control Center: Running the French custom install no longer results in a NewFeature1 component being listed
    * The link found in the second and third help page for the Change Desktop Settings found in the Japanese version of the Catalyst™ Control Center no longer cross-references to an incorrect help page
    * A black screen is no longer displayed when launching AMCap and attempting to view video from the tuner when using either the svideo or composite inputs
    * Display corruption is no longer noticed on the TV when setting the TV format to PAL-B and attempting to adjust the flicker removal in the TV Advanced option
    * Having a TV and CRT connected and clicking on Preview Automatic adjustment in the Optimize Media Center no longer results in both display devices displaying a black screen[/quote:95726860f0]
    Nog openstaande problemen:
    [quote:95726860f0]Known Issues for CATALYST™ Software Suite 5.4

    The following section provides a brief description of known issues associated with the latest version of CATALYST™. These include the following:

    * Doom3 Resurrection of Evil: Loading the saved game Medical Labs, may result in hesitation being noticed for a brief moment when moving through the door that is displayed in front of the character. Topic number 737-19379
    * Farcry: Playing the game under Windows XP SP2 with the display set to 1024x76832bpp along with AA disabled results in flashing textures being noticed when setting the game's video options to high detail. This issue is know to occur when using an ATI Radeon™ 9100 or 8500 series product. Topic number 737-10089
    * Half-Life 2: Having the display set to 1024x768 32bpp and setting the video options in the game set to 1600x1200 and all other options set to their maximum values results in sluggish performance and missing textures. Topic number 737-10086
    * Rainbow six3: Athena Sword: Playing the game under Windows 2000 with an ATI Radeon™ X700 installed results in the game failing to retain its resolution option of 1600x1200 if you Alt-tab out of the game and then Alt-tab back to the game. Topic number 737-535
    * Serious Sam: The Second Encounter: Playing the game for approximately 5 to 10 minutes under Windows XP with the game quality set at normal/default, results in display corruption being seen in the menu. Topic number 737-10090
    * Star Wars Knights of the Old Republic 2: Playing the game under Windows XP with an ATI Radeon™ 9800 series installed, results in display corruption being noticed when changing the in-game options from low to maximum Topic number 737-10091
    * Star Wars Knights of the Old Republic 2: Running the Dantoonie level of the game may result in hesitation being noticed. Topic number 737-19378
    World of Warcraft: Enabling Full-Screen Glow in the game may result in a blue screen image being displayed when walking under water. Topic number 737-19075
    * Assigning a hotkey to increase the overlay gamma results in the hotkey not functioning properly when playing an MPEG using the Windows Media Player. Topic number 737-494
    * The Apply button in the Custom settings of the Advanced mode found under the Catalyst™ Control Center Video standard settings is grayed out when playing a media file. Topic number 737-497
    * Installing the display driver and the Catalyst™ Control Center, results in a runtime error and the system tray failing to start when attempting to create multiple user accounts and enabling fast user switching. Topic number 737-10084
    * The Catalyst™ Control Center installation currently does not check for the installation of Microsoft .Net Framework before preceding with the install, resulting in an error message being displayed when attempting to launch the Catalyst™ Control Center. Topic number 737-10085
    * Changing the DPI setting found in the General tab of the display properties to Large size (120 DPI) results in the change not taking effect when launching the Catalyst™ Control Center. Topic number 737-18885
    * The Scale to Full Screen option found in the Theater Mode settings of the Catalyst Control CenterE is currently unavailable when using multiple display devices and enabling clone mode. Topic number 737-19380
    [/quote:95726860f0]
  • ik snap nooit dat ze het niet gelijk ff goeddoen… :roll:

    ennuh serious sam 2nd encounter problemen? Hoe oud is DAT?! :P (maar wel erg leuk… :lol: )
  • Programmeren is een delicate zaak en het testen van nieuwe drivers een omslachtig proces. Met drivers is het grote probleem dat bepaalde hardwarecombinaties problemen kunnen veroorzaken maar dat dergelijke combinaties soms vrij zeldzaam zijn. Men test doorgaans maar een vrij beperkt aantal combinaties voordat overgegaan wordt tot uitgave, waarbij natuurlijk vooral de gangbare combinaties getest worden, maar de kans dat er na de uitgave nog bugs tevoorschijn komen is natuurlijk levensgroot. Vandaar dat ATI ook een uitgebreid programma heeft voor het rapporteren van bugs om zo snel mogelijk dergelijke specifieke problemen op te lossen. De grootste test voor welk programma dan ook is het gewoon uitgeven. Nog een gegeven daarbij is natuurlijk dat geen enkel programma foutloos is.
  • Ik draai met Catalyst 4.6 omdat anders mijn favoriete spel (Emperor battle for dune uit 2001) heel raar gaat doen (veel artifacts met Catalyst 5.3 en 5.5). Andere spellen en 3Dmark03 werken prima op 5.5 en 4.6. Ik heb geen klachten met 4.6 (alleen 500 punten minder in 3Dmark03).

    Ligt toch niet aan mijn kaart ?

Beantwoord deze vraag

Dit is een gearchiveerde pagina. Antwoorden is niet meer mogelijk.