Vraag & Antwoord
tv kaart en kubuntu
19 antwoorden
- Toevallig iemand met dezelfde hardware en een tuto
http://www.blub.net/wiki/?page=LinuxTv - ben ff simpel snap er niks van
- hoe kan ik mijn tv kaart aan de praat krijgen
is een pannacle pctv110i
alvast bedankt - Wordt hij herkend?
Wat is de output van lspci? (console sudo lspci) - [code:1:b0a8b9544b]gekky@gekky-desktop:~$ sudo lspci
Password:
00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1)
00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1)
00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0 Controller (rev
a2)
00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev a2)
00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97 Audi
o Controller (rev a1)
00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5) (r ev a2)
00:0a.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller (v2.5) (rev a2)
00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2)
00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTra nsport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Con troller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscella neous Control
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 NJ [Radeon 9800 XT ]
01:00.1 Display controller: ATI Technologies Inc RV350 NJ [Radeon 9800 XT] (Seco ndary)
02:07.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broa dcast Decoder (rev d0)
02:09.0 RAID bus controller: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Se rial ATA Controller (rev 02)
gekky@gekky-desktop:~$
[/code:1:b0a8b9544b] - Volgens mij is dit hem
[code:1:d315c382a9]
02:07.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broa dcast Decoder (rev d0)
[/code:1:d315c382a9]
Die SAA7 ben ik op google een aantal keer tegengekomen. - hoe kan ik em aan de praat krijgen en welke software moet ik installeren ?
- Google eens met de gegevens die er staan, doe ik nu ook wel ff.
- [quote:20c487f743="gekky29"]hoe kan ik em aan de praat krijgen en welke software moet ik installeren ?
[/quote:20c487f743]
kdetv werkt voor mij prima, maar ik heb niet dezelfde tv-kaart als jij
www.kdetv.org
Op dit moment reageert de site niet, wellicht onderhoud of heel misschien installatie van een nieuwe versie van kdetv.
Maximilaan weet wellicht meer als de site off-line blijft…
Ik weet niet welke kernel je draait in je kubuntu. Enige vs. 2.6 kernels doen het niet met mijn kaart (medion met saa7134 mm-chip) maar in elk geval werkt de huidige 2.6.20 kernel prima.
Installeer kernel-sourrces als je met de default-kernel van kubuntu werkt, en kijk in /usr/src/linux/Documentation onder video4linux.
Daar staat vermeld welke tv-kaarten ondersteund worden.
FYI: Deze modules worden bij mij geladen door de kernel:
[code:1:20c487f743]#lsmod
Module Size Used by
snd_seq_dummy 2956 0
snd_seq_oss 29568 0
snd_seq_midi_event 6016 1 snd_seq_oss
snd_seq 44912 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 6412 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 41408 0
snd_mixer_oss 14848 1 snd_pcm_oss
tuner 59128 0
saa7134 113240 0
video_buf 19720 1 saa7134
compat_ioctl32 1280 1 saa7134
ir_kbd_i2c 6936 1 saa7134
ir_common 26508 2 saa7134,ir_kbd_i2c
videodev 25344 1 saa7134
v4l2_common 21760 3 tuner,saa7134,videodev
v4l1_compat 12680 2 saa7134,videodev
evdev 8192 0[/code:1:20c487f743]
ps. de door sander16v opgegeven tutorial stamt uit het jaar 2003.
Dat is veel te oud om nu in 2007nog mee te werken.
kdetv installatie is echt eenvoudiger dan wat daar staat, maar als je problemen hebt, is het eventueel een 'bron van inspiratie'.
succes, Douwe. - ff wachten op Maximilaan dan
hier mijn lijst
[code:1:c04fd66da4]lsmod
Module Size Used by
isofs 38076 1
udf 89348 0
rfcomm 42260 0
l2cap 27136 5 rfcomm
bluetooth 53476 4 rfcomm,l2cap
radeon 118816 2
drm 74644 3 radeon
cpufreq_userspace 5408 0
cpufreq_stats 7744 0
freq_table 6048 1 cpufreq_stats
cpufreq_powersave 2944 0
cpufreq_ondemand 8876 0
cpufreq_conservative 8712 0
video 17540 0
tc1100_wmi 8324 0
sbs 16804 0
sony_acpi 6412 0
pcc_acpi 14080 0
i2c_ec 6272 1 sbs
hotkey 11556 0
dev_acpi 12292 0
button 7952 0
battery 11652 0
container 5632 0
ac 6788 0
asus_acpi 17688 0
ipv6 272288 8
nls_utf8 3200 2
ntfs 112116 2
af_packet 24584 2
lp 12964 0
saa7134_alsa 15392 1
tsdev 9152 0
tuner 54828 0
saa7134 118496 1 saa7134_alsa
video_buf 27652 2 saa7134_alsa,saa7134
compat_ioctl32 2432 1 saa7134
v4l2_common 17280 2 tuner,saa7134
v4l1_compat 15108 1 saa7134
ir_kbd_i2c 9872 1 saa7134
ir_common 28548 2 saa7134,ir_kbd_i2c
videodev 10752 1 saa7134
snd_mpu401 9640 0
snd_mpu401_uart 10240 1 snd_mpu401
snd_rawmidi 27264 1 snd_mpu401_uart
snd_seq_device 9868 1 snd_rawmidi
snd_intel8x0 34844 2
snd_ac97_codec 97696 1 snd_intel8x0
snd_ac97_bus 3456 1 snd_ac97_codec
snd_pcm_oss 47360 0
snd_mixer_oss 19584 1 snd_pcm_oss
psmouse 41352 0
sg 37404 0
snd_pcm 84612 4 saa7134_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 25348 1 snd_pcm
snd 58372 17 saa7134_alsa,snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
snd_page_alloc 11400 2 snd_intel8x0,snd_pcm
analog 12960 0
serio_raw 8452 0
shpchp 42144 0
pci_hotplug 32828 1 shpchp
i2c_nforce2 8192 0
i2c_core 23424 5 i2c_ec,tuner,saa7134,ir_kbd_i2c,i2c_nforce2
amd64_agp 13124 1
agpgart 34888 2 drm,amd64_agp
floppy 63044 0
parport_pc 37796 1
parport 39496 2 lp,parport_pc
evdev 11392 1
soundcore 11232 1 snd
pcspkr 4352 0
gameport 17160 1 analog
ext3 142856 1
jbd 62228 1 ext3
forcedeth 32268 0
ehci_hcd 34696 0
ohci_hcd 22532 0
usbcore 134912 3 ehci_hcd,ohci_hcd
ide_generic 2432 0
sata_sil 11016 0
ide_cd 33696 1
cdrom 38944 1 ide_cd
generic 6276 0
amd74xx 15260 0 [permanent]
sd_mod 22656 6
sata_nv 11268 4
libata 74892 2 sata_sil,sata_nv
scsi_mod 144648 3 sg,sd_mod,libata
thermal 15624 0
processor 31560 1 thermal
fan 6020 0
fbcon 41504 0
tileblit 3840 1 fbcon
font 9344 1 fbcon
bitblit 7168 1 fbcon
softcursor 3328 1 bitblit
vesafb 9244 0
capability 5896 0
commoncap 8704 1 capability
[/code:1:c04fd66da4] - met compileren krijg ik onderstaande fout
[code:1:d0293f2276]This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.59. Invocation command line was
$ ./configure
## ——— ##
## Platform. ##
## ——— ##
hostname = gekky-desktop
uname -m = i686
uname -r = 2.6.17-11-generic
uname -s = Linux
uname -v = #2 SMP Thu Feb 1 19:52:28 UTC 2007
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = i686
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/X11R6/bin
## ———– ##
## Core tests. ##
## ———– ##
configure:1568: checking build system type
configure:1586: result: i686-pc-linux-gnu
configure:1594: checking host system type
configure:1608: result: i686-pc-linux-gnu
configure:1616: checking target system type
configure:1630: result: i686-pc-linux-gnu
configure:1677: checking for a BSD-compatible install
configure:1732: result: /usr/bin/install -c
configure:1747: checking for -p flag to install
configure:1760: result: yes
configure:1771: checking whether build environment is sane
configure:1814: result: yes
configure:1866: checking for gawk
configure:1895: result: no
configure:1866: checking for mawk
configure:1882: found /usr/bin/mawk
configure:1892: result: mawk
configure:1902: checking whether make sets $(MAKE)
configure:1922: result: yes
configure:2108: checking for kde-config
configure:2170: result: /usr/bin/kde-config
configure:2266: checking where to install
configure:2270: result: /usr (as returned by kde-config)
configure:2325: checking for style of include used by make
configure:2353: result: GNU
configure:2501: checking for gcc
configure:2517: found /usr/bin/gcc
configure:2527: result: gcc
configure:2771: checking for C compiler version
configure:2774: gcc –version </dev/null >&5
gcc (GCC) 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2777: $? = 0
configure:2779: gcc -v </dev/null >&5
Using built-in specs.
Target: i486-linux-gnu
Configured with: ../src/configure -v –enable-languages=c,c++,fortran,objc,obj-c++,treelang –prefix=/usr –enable-shared –with-system-zlib –libexecdir=/usr/lib –without-included-gettext –enable-threads=posix –enable-nls –program-suffix=-4.1 –enable-__cxa_atexit –enable-clocale=gnu –enable-libstdcxx-debug –enable-mpfr –enable-checking=release i486-linux-gnu
Thread model: posix
gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)
configure:2782: $? = 0
configure:2784: gcc -V </dev/null >&5
gcc: '-V' option must have argument
configure:2787: $? = 1
configure:2810: checking for C compiler default output file name
configure:2813: gcc conftest.c >&5
configure:2816: $? = 0
configure:2862: result: a.out
configure:2867: checking whether the C compiler works
configure:2873: ./a.out
configure:2876: $? = 0
configure:2893: result: yes
configure:2900: checking whether we are cross compiling
configure:2902: result: no
configure:2905: checking for suffix of executables
configure:2907: gcc -o conftest conftest.c >&5
configure:2910: $? = 0
configure:2935: result:
configure:2941: checking for suffix of object files
configure:2962: gcc -c conftest.c >&5
configure:2965: $? = 0
configure:2987: result: o
configure:2991: checking whether we are using the GNU C compiler
configure:3015: gcc -c conftest.c >&5
configure:3021: $? = 0
configure:3025: test -z
|| test ! -s conftest.err
configure:3028: $? = 0
configure:3031: test -s conftest.o
configure:3034: $? = 0
configure:3047: result: yes
configure:3053: checking whether gcc accepts -g
configure:3074: gcc -c -g conftest.c >&5
configure:3080: $? = 0
configure:3084: test -z
|| test ! -s conftest.err
configure:3087: $? = 0
configure:3090: test -s conftest.o
configure:3093: $? = 0
configure:3104: result: yes
configure:3121: checking for gcc option to accept ANSI C
configure:3191: gcc -c conftest.c >&5
configure:3197: $? = 0
configure:3201: test -z
|| test ! -s conftest.err
configure:3204: $? = 0
configure:3207: test -s conftest.o
configure:3210: $? = 0
configure:3228: result: none needed
configure:3246: gcc -c conftest.c >&5
conftest.c:2: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'me'
configure:3252: $? = 1
configure: failed program was:
| #ifndef __cplusplus
| choke me
| #endif
configure:3387: checking dependency style of gcc
configure:3477: result: gcc3
configure:3500: checking how to run the C preprocessor
configure:3535: gcc -E conftest.c
configure:3541: $? = 0
configure:3573: gcc -E conftest.c
conftest.c:11:28: error: ac_nonexistent.h: No such file or directory
configure:3579: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kdetv-0.8.9"
| #define VERSION "3.4.0"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:3618: result: gcc -E
configure:3642: gcc -E conftest.c
configure:3648: $? = 0
configure:3680: gcc -E conftest.c
conftest.c:11:28: error: ac_nonexistent.h: No such file or directory
configure:3686: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kdetv-0.8.9"
| #define VERSION "3.4.0"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:3810: checking for g++
configure:3839: result: no
configure:3810: checking for c++
configure:3839: result: no
configure:3810: checking for gpp
configure:3839: result: no
configure:3810: checking for aCC
configure:3839: result: no
configure:3810: checking for CC
configure:3839: result: no
configure:3810: checking for cxx
configure:3839: result: no
configure:3810: checking for cc++
configure:3839: result: no
configure:3810: checking for cl
configure:3839: result: no
configure:3810: checking for FCC
configure:3839: result: no
configure:3810: checking for KCC
configure:3839: result: no
configure:3810: checking for RCC
configure:3839: result: no
configure:3810: checking for xlC_r
configure:3839: result: no
configure:3810: checking for xlC
configure:3839: result: no
configure:3852: checking for C++ compiler version
configure:3855: g++ –version </dev/null >&5
./configure: line 3856: g++: command not found
configure:3858: $? = 127
configure:3860: g++ -v </dev/null >&5
./configure: line 3861: g++: command not found
configure:3863: $? = 127
configure:3865: g++ -V </dev/null >&5
./configure: line 3866: g++: command not found
configure:3868: $? = 127
configure:3871: checking whether we are using the GNU C++ compiler
configure:3895: g++ -c conftest.cc >&5
./configure: line 3896: g++: command not found
configure:3901: $? = 127
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kdetv-0.8.9"
| #define VERSION "3.4.0"
| /* end confdefs.h. */
|
| int
| main ()
| {
| #ifndef __GNUC__
| choke me
| #endif
|
| ;
| return 0;
| }
configure:3927: result: no
configure:3933: checking whether g++ accepts -g
configure:3954: g++ -c -g conftest.cc >&5
./configure: line 3955: g++: command not found
configure:3960: $? = 127
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kdetv-0.8.9"
| #define VERSION "3.4.0"
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:3984: result: no
configure:4026: g++ -c conftest.cc >&5
./configure: line 4027: g++: command not found
configure:4032: $? = 127
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kdetv-0.8.9"
| #define VERSION "3.4.0"
| /* end confdefs.h. */
|
| #include <stdlib.h>
| int
| main ()
| {
| exit (42);
| ;
| return 0;
| }
configure:4026: g++ -c conftest.cc >&5
./configure: line 4027: g++: command not found
configure:4032: $? = 127
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kdetv-0.8.9"
| #define VERSION "3.4.0"
| /* end confdefs.h. */
| extern "C" void std::exit (int) throw (); using std::exit;
| #include <stdlib.h>
| int
| main ()
| {
| exit (42);
| ;
| return 0;
| }
configure:4026: g++ -c conftest.cc >&5
./configure: line 4027: g++: command not found
configure:4032: $? = 127
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kdetv-0.8.9"
| #define VERSION "3.4.0"
| /* end confdefs.h. */
| extern "C" void std::exit (int); using std::exit;
| #include <stdlib.h>
| int
| main ()
| {
| exit (42);
| ;
| return 0;
| }
configure:4026: g++ -c conftest.cc >&5
./configure: line 4027: g++: command not found
configure:4032: $? = 127
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kdetv-0.8.9"
| #define VERSION "3.4.0"
| /* end confdefs.h. */
| extern "C" void exit (int) throw ();
| #include <stdlib.h>
| int
| main ()
| {
| exit (42);
| ;
| return 0;
| }
configure:4026: g++ -c conftest.cc >&5
./configure: line 4027: g++: command not found
configure:4032: $? = 127
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kdetv-0.8.9"
| #define VERSION "3.4.0"
| /* end confdefs.h. */
| extern "C" void exit (int);
| #include <stdlib.h>
| int
| main ()
| {
| exit (42);
| ;
| return 0;
| }
configure:4026: g++ -c conftest.cc >&5
./configure: line 4027: g++: command not found
configure:4032: $? = 127
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kdetv-0.8.9"
| #define VERSION "3.4.0"
| /* end confdefs.h. */
| void exit (int);
| #include <stdlib.h>
| int
| main ()
| {
| exit (42);
| ;
| return 0;
| }
configure:4115: checking dependency style of g++
configure:4205: result: none
configure:4224: checking whether gcc is blacklisted
configure:4250: gcc -c -O2 conftest.c >&5
configure:4256: $? = 0
configure:4260: test -z
|| test ! -s conftest.err
configure:4263: $? = 0
configure:4266: test -s conftest.o
configure:4269: $? = 0
configure:4281: result: no
configure:4618: checking whether g++ supports -Wmissing-format-attribute
configure:4654: rm -rf SunWS_cache; g++ -o conftest -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -Wno-non-virtual-dtor -Wmissing-format-attribute conftest.cc 1>&5
./configure: line 4655: g++: command not found
configure:4660: $? = 127
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kdetv-0.8.9"
| #define VERSION "3.4.0"
| #ifdef __cplusplus
| void exit (int);
| #endif
| /* end confdefs.h. */
|
| int
| main ()
| {
| return 0;
| ;
| return 0;
| }
configure:4699: result: no
configure:4706: checking whether gcc supports -Wmissing-format-attribute
configure:4739: gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wmissing-format-attribute conftest.c >&5
configure:4745: $? = 0
configure:4749: test -z
|| test ! -s conftest.err
configure:4752: $? = 0
configure:4755: test -s conftest
configure:4758: $? = 0
configure:4779: result: yes
configure:4793: checking whether g++ supports -Wundef
configure:4829: rm -rf SunWS_cache; g++ -o conftest -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -Wno-non-virtual-dtor -Wundef conftest.cc 1>&5
./configure: line 4830: g++: command not found
configure:4835: $? = 127
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kdetv-0.8.9"
| #define VERSION "3.4.0"
| #ifdef __cplusplus
| void exit (int);
| #endif
| /* end confdefs.h. */
|
| int
| main ()
| {
| return 0;
| ;
| return 0;
| }
configure:4874: result: no
configure:4881: checking whether g++ supports -Wno-long-long
configure:4917: rm -rf SunWS_cache; g++ -o conftest -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -Wno-non-virtual-dtor -Wno-long-long conftest.cc 1>&5
./configure: line 4918: g++: command not found
configure:4923: $? = 127
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kdetv-0.8.9"
| #define VERSION "3.4.0"
| #ifdef __cplusplus
| void exit (int);
| #endif
| /* end confdefs.h. */
|
| int
| main ()
| {
| return 0;
| ;
| return 0;
| }
configure:4962: result: no
configure:4969: checking whether g++ supports -Wnon-virtual-dtor
configure:5005: rm -rf SunWS_cache; g++ -o conftest -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -Wno-non-virtual-dtor -Wnon-virtual-dtor conftest.cc 1>&5
./configure: line 5006: g++: command not found
configure:5011: $? = 127
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kdetv-0.8.9"
| #define VERSION "3.4.0"
| #ifdef __cplusplus
| void exit (int);
| #endif
| /* end confdefs.h. */
|
| int
| main ()
| {
| return 0;
| ;
| return 0;
| }
configure:5050: result: no
configure:6107: checking how to run the C++ preprocessor
configure:6138: g++ -E conftest.cc
./configure: line 6139: g++: command not found
configure:6144: $? = 127
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kdetv-0.8.9"
| #define VERSION "3.4.0"
| #ifdef __cplusplus
| void exit (int);
| #endif
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:6138: g++ -E conftest.cc
./configure: line 6139: g++: command not found
configure:6144: $? = 127
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kdetv-0.8.9"
| #define VERSION "3.4.0"
| #ifdef __cplusplus
| void exit (int);
| #endif
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:6138: /lib/cpp conftest.cc
cpp: error trying to exec 'cc1plus': execvp: No such file or directory
configure:6144: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kdetv-0.8.9"
| #define VERSION "3.4.0"
| #ifdef __cplusplus
| void exit (int);
| #endif
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:6138: /lib/cpp conftest.cc
cpp: error trying to exec 'cc1plus': execvp: No such file or directory
configure:6144: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kdetv-0.8.9"
| #define VERSION "3.4.0"
| #ifdef __cplusplus
| void exit (int);
| #endif
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:6221: result: /lib/cpp
configure:6245: /lib/cpp conftest.cc
cpp: error trying to exec 'cc1plus': execvp: No such file or directory
configure:6251: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kdetv-0.8.9"
| #define VERSION "3.4.0"
| #ifdef __cplusplus
| void exit (int);
| #endif
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:6245: /lib/cpp conftest.cc
cpp: error trying to exec 'cc1plus': execvp: No such file or directory
configure:6251: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kdetv-0.8.9"
| #define VERSION "3.4.0"
| #ifdef __cplusplus
| void exit (int);
| #endif
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:6320: error: C++ preprocessor "/lib/cpp" fails sanity check
See `config.log' for more details.
## —————- ##
## Cache variables. ##
## —————- ##
ac_cv_build=i686-pc-linux-gnu
ac_cv_build_alias=i686-pc-linux-gnu
ac_cv_c_compiler_gnu=yes
ac_cv_cxx_compiler_gnu=no
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFLAGS_set=
ac_cv_env_CXXFLAGS_value=
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_F77_set=
ac_cv_env_F77_value=
ac_cv_env_FFLAGS_set=
ac_cv_env_FFLAGS_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_exeext=
ac_cv_host=i686-pc-linux-gnu
ac_cv_host_alias=i686-pc-linux-gnu
ac_cv_objext=o
ac_cv_path_install='/usr/bin/install -c'
ac_cv_prog_AWK=mawk
ac_cv_prog_CPP='gcc -E'
ac_cv_prog_CXXCPP=/lib/cpp
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_cc_g=yes
ac_cv_prog_cc_stdc=
ac_cv_prog_cxx_g=no
ac_cv_prog_make_make_set=yes
ac_cv_target=i686-pc-linux-gnu
ac_cv_target_alias=i686-pc-linux-gnu
am_cv_CC_dependencies_compiler_type=gcc3
am_cv_CXX_dependencies_compiler_type=none
kde_cv_path=/usr/bin/kde-config
kde_cv_path_kde_config=/usr/bin/kde-config
kde_cv_prog_cc_Wmissing_format_attribute=yes
## —————– ##
## Output variables. ##
## —————– ##
ACLOCAL='${SHELL} /home/gekky/Desktop/kdetv-0.8.9/admin/missing –run aclocal-1.9'
ALSA_INCLUDES=''
ALSA_LDFLAGS=''
AMDEPBACKSLASH=''
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='${SHELL} /home/gekky/Desktop/kdetv-0.8.9/admin/missing –run tar'
AR=''
ARCH_386_FALSE=''
ARCH_386_TRUE=''
ARCH_X86_64_FALSE=''
ARCH_X86_64_TRUE=''
ARCH_X86_FALSE=''
ARCH_X86_TRUE=''
ARTSCCONFIG=''
AUTOCONF='${SHELL} /home/gekky/Desktop/kdetv-0.8.9/admin/missing –run autoconf'
AUTODIRS=''
AUTOHEADER='${SHELL} /home/gekky/Desktop/kdetv-0.8.9/admin/missing –run autoheader'
AUTOMAKE='${SHELL} /home/gekky/Desktop/kdetv-0.8.9/admin/missing –run automake-1.9'
AWK='mawk'
CC='gcc'
CCDEPMODE='depmode=gcc3'
CFLAGS='-std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute'
CONF_FILES=' $(top_srcdir)/./admin/configure.in.min $(top_srcdir)/configure.in.in $(top_srcdir)/./kdetv/configure.in.in $(top_srcdir)/./kdetv/plugins/configure.in.in $(top_srcdir)/./kdetv/plugins/misc/configure.in.in $(top_srcdir)/./kdetv/plugins/mixer/configure.in.in $(top_srcdir)/./kdetv/plugins/video/configure.in.in'
CPP='gcc -E'
CPPFLAGS=''
CXX='g++'
CXXCPP='/lib/cpp'
CXXDEPMODE='depmode=none'
CXXFLAGS='-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -Wno-non-virtual-dtor'
CYGPATH_W='echo'
DCOPIDL2CPP=''
DCOPIDL=''
DCOPIDLNG=''
DCOP_DEPENDENCIES=''
DEFS=''
DEPDIR='.deps'
DOXYGEN=''
DOXYGEN_PROJECT_NAME=''
DOXYGEN_PROJECT_NUMBER=''
ECHO='echo'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ENABLE_PERMISSIVE_FLAG=''
EXEEXT=''
F77=''
FFLAGS=''
FRAMEWORK_COREAUDIO=''
GLINC=''
GLLIB=''
GMSGFMT=''
HAVE_GCC_VISIBILITY='0'
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s'
KCFG_DEPENDENCIES=''
KCONFIG_COMPILER=''
KDECONFIG='/usr/bin/kde-config'
KDETV_LIBS=''
KDE_EXTRA_RPATH=''
KDE_HAS_DOXYGEN=''
KDE_HAVE_DOT=''
KDE_INCLUDES=''
KDE_LDFLAGS=''
KDE_MT_LDFLAGS=''
KDE_MT_LIBS=''
KDE_NO_UNDEFINED=''
KDE_PLUGIN=''
KDE_RPATH=''
KDE_USE_CLOSURE_FALSE=''
KDE_USE_CLOSURE_TRUE=''
KDE_USE_FINAL_FALSE=''
KDE_USE_FINAL_TRUE=''
KDE_USE_NMCHECK_FALSE=''
KDE_USE_NMCHECK_TRUE=''
KDE_XSL_STYLESHEET=''
LDFLAGS=''
LDFLAGS_AS_NEEDED=''
LDFLAGS_NEW_DTAGS=''
LIBALSA=''
LIBCOMPAT=''
LIBCRYPT=''
LIBDL=''
LIBJPEG=''
LIBOBJS=''
LIBPNG=''
LIBPTHREAD=''
LIBRESOLV=''
LIBS=''
LIBSM=''
LIBSOCKET=''
LIBTOOL=''
LIBUCB=''
LIBUTIL=''
LIBZ=''
LIBZVBI=''
LIB_ARTS=''
LIB_KAB=''
LIB_KABC=''
LIB_KDECORE=''
LIB_KDEPIM=''
LIB_KDEPRINT=''
LIB_KDEUI=''
LIB_KDNSSD=''
LIB_KFILE=''
LIB_KFM=''
LIB_KHTML=''
LIB_KIMPROXY=''
LIB_KIO=''
LIB_KJS=''
LIB_KNEWSTUFF=''
LIB_KPARTS=''
LIB_KSPELL=''
LIB_KSYCOCA=''
LIB_KUTILS=''
LIB_LIRC_KDETV=''
LIB_POLL=''
LIB_QPE=''
LIB_QT=''
LIB_SMB=''
LIB_X11=''
LIB_XEXT=''
LIB_XRENDER=''
LN_S=''
LTLIBOBJS=''
MAKEINFO='${SHELL} /home/gekky/Desktop/kdetv-0.8.9/admin/missing –run makeinfo'
MAKEKDEWIDGETS=''
MCOPIDL=''
MEINPROC=''
MOC=''
MSGFMT=''
NOOPT_CFLAGS=''
NOOPT_CXXFLAGS=''
OBJEXT='o'
PACKAGE='kdetv-0.8.9'
PACKAGE_BUGREPORT=''
PACKAGE_NAME=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
PERL=''
QTDOCDIR=''
QTE_NORTTI=''
QT_INCLUDES=''
QT_LDFLAGS=''
RANLIB=''
SET_MAKE=''
SHELL='/bin/bash'
STRIP=''
TOPSUBDIRS=''
UIC=''
UIC_TR=''
USER_INCLUDES=''
USER_LDFLAGS=''
USE_EXCEPTIONS=''
USE_MMX_REGISTER=''
USE_RTTI=''
USE_THREADS=''
VERSION='3.4.0'
WOVERLOADED_VIRTUAL=''
XGETTEXT=''
XMLLINT=''
X_EXTRA_LIBS=''
X_INCLUDES=''
X_LDFLAGS=''
X_PRE_LIBS=''
X_RPATH=''
ZVBI_INCLUDES=''
ZVBI_LDFLAGS=''
ac_ct_AR=''
ac_ct_CC='gcc'
ac_ct_CXX='g++'
ac_ct_F77=''
ac_ct_RANLIB=''
ac_ct_STRIP=''
all_includes=''
all_libraries=''
am__fastdepCC_FALSE='#'
am__fastdepCC_TRUE=''
am__fastdepCXX_FALSE=''
am__fastdepCXX_TRUE='#'
am__include='include'
am__leading_dot='.'
am__quote=''
am__tar='${AMTAR} chof - "$$tardir"'
am__untar='${AMTAR} xf -'
bindir='${exec_prefix}/bin'
build='i686-pc-linux-gnu'
build_alias=''
build_cpu='i686'
build_os='linux-gnu'
build_vendor='pc'
datadir='${prefix}/share'
doc_SUBDIR_included_FALSE=''
doc_SUBDIR_included_TRUE=''
exec_prefix='NONE'
host='i686-pc-linux-gnu'
host_alias=''
host_cpu='i686'
host_os='linux-gnu'
host_vendor='pc'
include_ALSADIR_FALSE=''
include_ALSADIR_TRUE=''
include_ARTS_FALSE=''
include_ARTS_TRUE=''
include_ZVBIDIR_FALSE=''
include_ZVBIDIR_TRUE=''
include_kdetvvideo_FALSE=''
include_kdetvvideo_TRUE=''
include_x11_FALSE=''
include_x11_TRUE=''
includedir='${prefix}/include'
infodir='${prefix}/info'
install_sh='/home/gekky/Desktop/kdetv-0.8.9/admin/install-sh'
kde_appsdir=''
kde_bindir=''
kde_confdir=''
kde_datadir=''
kde_htmldir=''
kde_icondir=''
kde_includes=''
kde_kcfgdir=''
kde_libraries=''
kde_libs_htmldir='/usr/share/doc/kde/HTML'
kde_libs_prefix='/usr'
kde_locale=''
kde_mimedir=''
kde_moduledir=''
kde_qtver=''
kde_servicesdir=''
kde_servicetypesdir=''
kde_sounddir=''
kde_styledir=''
kde_templatesdir=''
kde_wallpaperdir=''
kde_widgetdir=''
kdeinitdir=''
kdetv_SUBDIR_included_FALSE=''
kdetv_SUBDIR_included_TRUE=''
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localstatedir='${prefix}/var'
mandir='${prefix}/man'
mkdir_p='mkdir -p –'
oldincludedir='/usr/include'
po_SUBDIR_included_FALSE=''
po_SUBDIR_included_TRUE=''
prefix='/usr'
program_transform_name='s,x,x,'
qt_includes=''
qt_libraries=''
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target='i686-pc-linux-gnu'
target_alias=''
target_cpu='i686'
target_os='linux-gnu'
target_vendor='pc'
unsermake_enable_pch_FALSE=''
unsermake_enable_pch_TRUE='#'
x_includes='NONE'
x_libraries='NONE'
xdg_appsdir=''
xdg_directorydir=''
xdg_menudir=''
## ———– ##
## confdefs.h. ##
## ———– ##
#define PACKAGE "kdetv-0.8.9"
#define PACKAGE_BUGREPORT ""
#define PACKAGE_NAME ""
#define PACKAGE_STRING ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""
#define VERSION "3.4.0"
#endif
#ifdef __cplusplus
void exit (int);
configure: exit 1
[/code:1:d0293f2276] - [quote:c0a84b5c67="gekky29"]met compileren krijg ik onderstaande fout [code:1:c0a84b5c67] Output groot genoeg om te gebruiken als behang[/code:1:c0a84b5c67] [/quote:c0a84b5c67]Wellicht zou je beter kunnen proberen kdetv te installeren via apt-get. Check in je /etc/apt/sources.list naar
[code:1:c0a84b5c67]
## Uncomment the following two lines to add software from the 'universe'
## repository. [/code:1:c0a84b5c67] om een paar hekjes te verwijderen voor die deb en deb-src regels.
Die universe repository heb je nodig om kdetv via het volgende commando te kunnen installeren
[code:1:c0a84b5c67]
sudo apt-get update
[/code:1:c0a84b5c67][Enter]
en
[code:1:c0a84b5c67]
sudo apt-get install kdetv
[/code:1:c0a84b5c67][Enter] - [code:1:6c57895f89]sudo apt-get install kdetv[/code:1:6c57895f89]
dat deed het em thnx - krijg alleen geen geluid
[edit]
heb alle geluid opties in het prograaamma geprobeerd
[/edit] - [quote:c506365b7d="gekky29"]krijg alleen geen geluid[/quote:c506365b7d] Bedoel je helemaal geen geluid? Of alleen geen geluid van je tv kaart? Had je wel dat audio kabeltje aan de achterkant van je PC van je tv kaart naar je (onboard)geluidskaart aangesloten?
- alleen met de tv kaart verder doet het geluid het goed
[quote:f10a677e44]Had je wel dat audio kabeltje aan de achterkant van je PC van je tv kaart naar je (onboard)geluidskaart aangesloten?[/quote:f10a677e44]
zit aan de binnenkant en is aan gesloten - [quote:13e26371c1="gekky29"] zit aan de binnenkant en is aan gesloten [/quote:13e26371c1] Op de Line-in? Check ook nog even deze discussie,
- op de aux geloof ik
wat ook moest - heb ff in windows getest krijg alleen geluid via de kaart en niet via de onbaord audio
kabeltje stuk denk
Beantwoord deze vraag
Dit is een gearchiveerde pagina. Antwoorden is niet meer mogelijk.
Gerelateerde vragen
- URL zonder extensie wil niet helemaal lukken
- https verbinding met ssl in owncloud
- afspelen met audacity werkt niet goed
- Computer!Totaal-forum maakt plaats voor v&a-module
- computer start soms niet op
- Pro show gold 4 overgangen tussen tekstdia's
- wie kan mij meer vertellen over een Gigabyte GA-B85M-HD3
- Windows Tijdelijke bestanden