Vraag & Antwoord

OS Linux

Slackware 8.1: een aantal vraagjes

29 antwoorden
  • Hoi ik heb mijn tweede linux systeem opgezet. Inmiddels wekt x naar behoren dankzij dit forum, maar nu kom ik er toch weer niet uit. 1) op de laptop zit een geluidskaart deze wil ik graag gebruiken, bij mijn andere systeem was dit een kwestie van een module bij de kernel laden, maar dat schijnt nu niet te werken. Ik heb al in de howto's gekeken, maar daar kom ik niet uit. wat moet ik doen om het geluid aan de praat te krijgen. Het is een soud blaster pro compatible van yamaha 2) Ik heb een usb diskette station, hoe krijg ik deze aan de praat? Ik heb al geprobeerd hem er aan te hangen en daarna mount /floppy, maar dat werkt ook niet. Op /dev/fd0 kan ik hem ook niet vinden Alvast bedankt Rob
  • ik heb geen ervaring met usb floppydrives, dus zou niet weten hoe dat precies moet, maar heb je wel usb support in je kernel zitten? je moet dan iig de module ( als deze neit hard in de kenel zit ) "usbcore" laden, maar hoe je verder moet zou ik helaas niet weten, wie weet pakt hij hem dan wl in een keer :P grtz, plors
  • [quote:821d2b8f7c="Rob van Esch"] 1) op de laptop zit een geluidskaart. Het is een soud blaster pro compatible van yamaha [/quote:821d2b8f7c] Kijk eens op www.alsa-project.org Hier is voor een heel rijtje yamaha-kaarten en -geluids-chips ondersteuning van het geluid te vinden. (Bij mijn fancy-merk kaartje bleek dat de chip een yamaha-724 is, de ymfpci driver doet het prima). Je moet in de kernel alleen sound=y kiezen en de rest (van keuzes voor geluid) afzetten. (als dat niet zo is: kernel opnieuw compileren). Vervolgens de alsa driver, lib & utils downen en installeren. Tip: bij de alsa-driver: doe eerst ./configure --help om uit te vissen welke optie je moet geven voor jouw geluidskaart. Zonder opties krijg je driver-modules voor alle kaarten (scheelt behoorlijk). Om geluid op te starten onder Slackware bij het booten en netjes af te sluiten bij shutdown: er is een RedHat scriptje 'alsasound' in de driver-dir in de dir utils dat je kunt gebruiken, je copieert het naar (bv.) /etc/init.d . In /etc/rc.d/rc.local een start aanroep plaatsen (zelf maken) en in /etc/rc.d/rc.6 de stop-aanroep. Verder gewoon de manual volgen (is ingewikkeld genoeg....). Als je bv. de xmms player wilt gebruiken (en dat wil je :) ) ook ondersteuning voor OSS installeren. Op http://www.opensound.com/ vind je de commerciele OSS sound drivers. (Geen ervaring mee). [quote:821d2b8f7c="Rob van Esch"]. 2) Ik heb een usb diskette station, hoe krijg ik deze aan de praat? [/quote:821d2b8f7c] Google: "usb floppy linux" (zonder de quotes) gaf in elk geval aan dat het usb diskette station in Linux als SCSI device wordt gezien. Moet lukken. Stel gerust nadere vragen als e.e.a. niet duidelijk is. Succes, Douwe.
  • hoi Ik heb de drivers gedownload, maar welke versie moet ik hebben, ik heb nu 0.5.2 is dat de goede?? Op de website kon ik nergens iets vinden In die floppy drive moet ik me maar eens gaan verdiepen Alvast bedankt Rob
  • Gewoon die proberen en instructies opvolgen :) Mocht je problemen of foutmeldingen krijgen, post ze dan maar weer hier en dan gaan we er wel naar kijken :)
  • [quote:6a6c6732c2="Rob van Esch"]hoi Ik heb de drivers gedownload, maar welke versie moet ik hebben, ik heb nu 0.5.2 is dat de goede?? Op de website kon ik nergens iets vinden In die floppy drive moet ik me maar eens gaan verdiepen Alvast bedankt Rob[/quote:6a6c6732c2] Ik zou versie 9.0 pakken.
  • [quote:e05b78cf99="Rob van Esch"] 1) op de laptop zit een geluidskaart deze wil ik graag gebruiken, bij mijn andere systeem was dit een kwestie van een module bij de kernel laden, maar dat schijnt nu niet te werken. geluid aan de praat te krijgen. Het is een soud blaster pro compatible van yamaha [/quote:e05b78cf99] Bedoel je dat je dit al geprobeerd hebt? /etc/rc.d/rc.modules [code:1:e05b78cf99] ### Sound support ### # Sound Blaster Pro/16 support: /sbin/modprobe sb io=0x220 irq=5 dma=3 dma16=5 mpu_io=0x300 [/code:1:e05b78cf99] [quote:e05b78cf99="Rob van Esch"] 2) Ik heb een usb diskette station, hoe krijg ik deze aan de praat? Ik heb al geprobeerd hem er aan te hangen en daarna mount /floppy, maar dat werkt ook niet. Op /dev/fd0 kan ik hem ook niet vinden [/quote:e05b78cf99] /etc/rc.d/rc.modules [code:1:e05b78cf99] ### USB Host Controllers: # Universal Host Controller Interface (Intel standard): /sbin/modprobe usb-uhci # USB Mass Storage support: /sbin/modprobe usb-storage [/code:1:e05b78cf99] Na de reboot kan de USB floppy gemount worden. [code:1:e05b78cf99] mount /dev/sda4 /mnt/floppy [/code:1:e05b78cf99] Bij mij met Slackware 8.1 op een Dual Pentium III 1000 Mhz 512 MB RAM met een USB Zip 250 MB werkt het in ieder geval. :wink:
  • bij het compileren van de driver krijgg ik de error dat hij ymfpci driveer niet kaan vvinden? wat mmoet ik nu doen alvast bedankt rob
  • Post je complete errorlog eens na het compileren (file spuugt hij uit)
  • zover ik weet is het niet nodig om alsa te nemen als je geluidskaart gewoon wordt ondersteunt vanuit de standaar slackware install. Het enige dat je moet doen is de rechten(!) op /dev/dsp1 en /dev/mixer goed zetten! nu kun je wel chmod 777 /dev/mixer gaan doen, maar dat is niet de linux methode! /dev/mixer en dsp1 zijn van een bepaalde groep (sys even uit m'n hoofd), maak je zelf lid van die groep...laad de goede module en het hele zootje werkt.
  • [quote:66717aab9d="smeets_marc"]zover ik weet is het niet nodig om alsa te nemen als je geluidskaart gewoon wordt ondersteunt vanuit de standaar slackware install. Het enige dat je moet doen is de rechten(!) op /dev/dsp1 en /dev/mixer goed zetten! nu kun je wel chmod 777 /dev/mixer gaan doen, maar dat is niet de linux methode! /dev/mixer en dsp1 zijn van een bepaalde groep (sys even uit m'n hoofd), maak je zelf lid van die groep...laad de goede module en het hele zootje werkt.[/quote:66717aab9d] In dat geval zou je als root wel geluid moeten hebben. (Edit: klein beetje niet nuttige info verwijderd).
  • idd ja, maar ik kon dat niet uit z'n vorige threads halen, dus post ik het ff.
  • waar kaan ik ergens die errorlog vinden? Ik ben inmiddels overgestaapt oop versie 9, maar nu krijg ik compile error 1. Weet iemand wat dit betekend alvast bedankt Rob
  • [quote:6e2181ada2] Na de reboot kan de USB floppy gemount worden. Code: mount /dev/sda4 /mnt/floppy [/quote:6e2181ada2] het lampje op het station gaat wel branden, dus de device is goed, alleen het file system pakt ieniet, die moet toch gewoon vfat zijn? Alvast bedankt Rob
  • Ik mis idd de optie voor het bestandssysteem in het commando. [code:1:4cd3598d8f] mount -t auto /dev/sda4 /mnt/floppy [/code:1:4cd3598d8f] zou moeten werken. (auto houdt in dat de kernel zelf bepaalt welk bestandssysteem het is..) Max
  • Helaas Ook dit werkt niet, ik krijg nu weer een error. Ik heb verschillende disks geprobeerd. En waarkan ik die error log voor het geluid vinden, dit heb ik ook nog steedsniet aan de praat
  • Worden alle USB modules geladen? [code:1:c4290ae86d] root@darkstar:~# lsmod Module Size Used by Not tainted pcmcia_core 40896 0 ide-scsi 7456 0 usb-storage 47808 0 usb-uhci 20708 0 (unused) usbcore 48000 0 [usb-storage usb-uhci] root@darkstar:~# [/code:1:c4290ae86d] Typ dan eens als root: [color=blue:c4290ae86d] cfdisk /dev/sda [/color:c4290ae86d] [code:1:c4290ae86d] cfdisk 2.11r Disk Drive: /dev/sda Size: 250640384 bytes, 250 MB Heads: 64 Sectors per Track: 32 Cylinders: 239 Name Flags Part Type FS Type [Label] Size (MB) ------------------------------------------------------------------------------ sda4 Boot Primary FAT16 [ZIP250 ] 250.61 [/code:1:c4290ae86d] Wat onder Name staat is de te mounten partitie. Voor mijn Zip 250 is dat dus /dev/sda4 En eventuele errors die je tijdens compileren in een Terminal krijgt kun je toch gewoon met je rechter muisknop selecteren, en met de middelste muisknop plakken in een editor. :roll:
  • Oke na wat moeite hier de volledige error log, schrikniet van de lengte!!! [code:1:e1018a032d] bash-2.05a# cd /usr/src/alsa/alsa* bash-2.05a# pwd /usr/src/alsa/alsa-driver-0.9.0rc3 bash-2.05a# ./configure loading cache ./config.cache checking for gcc... (cached) gcc checking whether the C compiler (gcc ) works... yes checking whether the C compiler (gcc ) is a cross-compiler... no checking whether we are using GNU C... (cached) yes checking whether gcc accepts -g... (cached) yes checking for ranlib... (cached) ranlib checking for a BSD compatible install... (cached) /usr/bin/ginstall -c checking how to run the C preprocessor... (cached) gcc -E checking for ANSI C header files... (cached) yes checking for working const... (cached) yes checking for inline... (cached) inline checking whether time.h and sys/time.h may both be included... (cached) yes checking whether gcc needs -traditional... (cached) no checking for current directory... /usr/src/alsa/alsa-driver-0.9.0rc3 checking cross compile... checking for directory with kernel source... /lib/modules/2.4.18/build checking for kernel version... 2.4.18 checking for kernel linux/pm.h... yes checking for kernel module symbol versions... no checking for PCI support in kernel... yes checking for SGI/MIPS (HAL2) architecture... no checking for directory to store kernel modules... /lib/modules/2.4.18/kernel/sound checking for verbose printk... on checking for debug level... none checking for processor type... i386 checking for SMP... no checking for ISA PnP driver in kernel... yes checking for ISA PnP support... yes checking for driver version... 0.9.0rc3 checking for sequencer support... yes checking for OSS/Free emulation... yes checking for RTC callback support in kernel... no checking for USB... yes checking for which soundcards to compile driver for... all ./configure: cmp: command not found updating cache ./config.cache creating ./config.status creating version creating Makefile.conf creating snddevices creating utils/alsa-driver.spec creating utils/buildrpm creating toplevel.config creating include/config.h creating include/config1.h creating include/version.h bash-2.05a# make if [ ! -d include/sound -a ! -L include/sound ]; then \ ln -sf ../alsa-kernel/include include/sound ; \ fi cp -auvf include/version.h include/sound/version.h `include/version.h' -> `include/sound/version.h' make[1]: Entering directory `/usr/src/alsa/alsa-driver-0.9.0rc3/acore' gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DEXPORT_SYMTAB -c hwdep.c In file included from /usr/src/alsa/alsa-driver-0.9.0rc3/include/adriver.h:124, from /usr/src/alsa/alsa-driver-0.9.0rc3/include/sound/driver.h:43, from ../alsa-kernel/core/hwdep.c:22, from hwdep.c:1: /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: `struct isapnp_card_id' declared inside parameter list /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: its scope is only this definition or declaration, which is probably not what you want. gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DEXPORT_SYMTAB -c pcm.c In file included from /usr/src/alsa/alsa-driver-0.9.0rc3/include/adriver.h:124, from /usr/src/alsa/alsa-driver-0.9.0rc3/include/sound/driver.h:43, from ../alsa-kernel/core/pcm.c:22, from pcm.c:1: /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: `struct isapnp_card_id' declared inside parameter list /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: its scope is only this definition or declaration, which is probably not what you want. gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DKBUILD_BASENAME=pcm_native -c -o pcm_native.o pcm_native.c In file included from /usr/src/alsa/alsa-driver-0.9.0rc3/include/adriver.h:124, from /usr/src/alsa/alsa-driver-0.9.0rc3/include/sound/driver.h:43, from ../alsa-kernel/core/pcm_native.c:22, from pcm_native.c:2: /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: `struct isapnp_card_id' declared inside parameter list /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: its scope is only this definition or declaration, which is probably not what you want. gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DEXPORT_SYMTAB -c pcm_lib.c In file included from /usr/src/alsa/alsa-driver-0.9.0rc3/include/adriver.h:124, from /usr/src/alsa/alsa-driver-0.9.0rc3/include/sound/driver.h:43, from ../alsa-kernel/core/pcm_lib.c:23, from pcm_lib.c:2: /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: `struct isapnp_card_id' declared inside parameter list /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: its scope is only this definition or declaration, which is probably not what you want. gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DKBUILD_BASENAME=pcm_timer -c -o pcm_timer.o pcm_timer.c In file included from /usr/src/alsa/alsa-driver-0.9.0rc3/include/adriver.h:124, from /usr/src/alsa/alsa-driver-0.9.0rc3/include/sound/driver.h:43, from ../alsa-kernel/core/pcm_timer.c:22, from pcm_timer.c:2: /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: `struct isapnp_card_id' declared inside parameter list /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: its scope is only this definition or declaration, which is probably not what you want. gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DKBUILD_BASENAME=pcm_misc -c -o pcm_misc.o pcm_misc.c In file included from /usr/src/alsa/alsa-driver-0.9.0rc3/include/adriver.h:124, from /usr/src/alsa/alsa-driver-0.9.0rc3/include/sound/driver.h:43, from ../alsa-kernel/core/pcm_misc.c:22, from pcm_misc.c:2: /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: `struct isapnp_card_id' declared inside parameter list /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: its scope is only this definition or declaration, which is probably not what you want. gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DKBUILD_BASENAME=pcm_memory -c -o pcm_memory.o pcm_memory.c In file included from /usr/src/alsa/alsa-driver-0.9.0rc3/include/adriver.h:124, from /usr/src/alsa/alsa-driver-0.9.0rc3/include/sound/driver.h:43, from ../alsa-kernel/core/pcm_memory.c:22, from pcm_memory.c:2: /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: `struct isapnp_card_id' declared inside parameter list /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: its scope is only this definition or declaration, which is probably not what you want. gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DEXPORT_SYMTAB -c pcm_sgbuf.c In file included from /usr/src/alsa/alsa-driver-0.9.0rc3/include/adriver.h:124, from /usr/src/alsa/alsa-driver-0.9.0rc3/include/sound/driver.h:43, from ../alsa-kernel/core/pcm_sgbuf.c:22, from pcm_sgbuf.c:2: /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: `struct isapnp_card_id' declared inside parameter list /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: its scope is only this definition or declaration, which is probably not what you want. gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DEXPORT_SYMTAB -c rawmidi.c In file included from /usr/src/alsa/alsa-driver-0.9.0rc3/include/adriver.h:124, from /usr/src/alsa/alsa-driver-0.9.0rc3/include/sound/driver.h:43, from ../alsa-kernel/core/rawmidi.c:22, from rawmidi.c:1: /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: `struct isapnp_card_id' declared inside parameter list /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: its scope is only this definition or declaration, which is probably not what you want. gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DEXPORT_SYMTAB -c timer.c In file included from /usr/src/alsa/alsa-driver-0.9.0rc3/include/adriver.h:124, from /usr/src/alsa/alsa-driver-0.9.0rc3/include/sound/driver.h:43, from ../alsa-kernel/core/timer.c:22, from timer.c:1: /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: `struct isapnp_card_id' declared inside parameter list /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: its scope is only this definition or declaration, which is probably not what you want. gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DEXPORT_SYMTAB -c sound.c In file included from /usr/src/alsa/alsa-driver-0.9.0rc3/include/adriver.h:124, from /usr/src/alsa/alsa-driver-0.9.0rc3/include/sound/driver.h:43, from ../alsa-kernel/core/sound.c:22, from sound.c:2: /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: `struct isapnp_card_id' declared inside parameter list /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: its scope is only this definition or declaration, which is probably not what you want. gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DKBUILD_BASENAME=init -c -o init.o init.c In file included from /usr/src/alsa/alsa-driver-0.9.0rc3/include/adriver.h:124, from /usr/src/alsa/alsa-driver-0.9.0rc3/include/sound/driver.h:43, from ../alsa-kernel/core/init.c:22, from init.c:2: /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: `struct isapnp_card_id' declared inside parameter list /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: its scope is only this definition or declaration, which is probably not what you want. gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DKBUILD_BASENAME=isadma -c -o isadma.o isadma.c In file included from /usr/src/alsa/alsa-driver-0.9.0rc3/include/adriver.h:124, from /usr/src/alsa/alsa-driver-0.9.0rc3/include/sound/driver.h:43, from ../alsa-kernel/core/isadma.c:29, from isadma.c:2: /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: `struct isapnp_card_id' declared inside parameter list /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: its scope is only this definition or declaration, which is probably not what you want. gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DKBUILD_BASENAME=memory -c -o memory.o memory.c In file included from /usr/src/alsa/alsa-driver-0.9.0rc3/include/adriver.h:124, from /usr/src/alsa/alsa-driver-0.9.0rc3/include/sound/driver.h:43, from ../alsa-kernel/core/memory.c:22, from memory.c:2: /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: `struct isapnp_card_id' declared inside parameter list /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: its scope is only this definition or declaration, which is probably not what you want. gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DKBUILD_BASENAME=info -c -o info.o info.c In file included from /usr/src/alsa/alsa-driver-0.9.0rc3/include/adriver.h:124, from /usr/src/alsa/alsa-driver-0.9.0rc3/include/sound/driver.h:43, from ../alsa-kernel/core/info.c:22, from info.c:2: /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: `struct isapnp_card_id' declared inside parameter list /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: its scope is only this definition or declaration, which is probably not what you want. gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DKBUILD_BASENAME=control -c -o control.o control.c In file included from /usr/src/alsa/alsa-driver-0.9.0rc3/include/adriver.h:124, from /usr/src/alsa/alsa-driver-0.9.0rc3/include/sound/driver.h:43, from ../alsa-kernel/core/control.c:22, from control.c:2: /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: `struct isapnp_card_id' declared inside parameter list /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: its scope is only this definition or declaration, which is probably not what you want. gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DKBUILD_BASENAME=misc -c -o misc.o misc.c In file included from /usr/src/alsa/alsa-driver-0.9.0rc3/include/adriver.h:124, from /usr/src/alsa/alsa-driver-0.9.0rc3/include/sound/driver.h:43, from ../alsa-kernel/core/misc.c:22, from misc.c:3: /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: `struct isapnp_card_id' declared inside parameter list /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: its scope is only this definition or declaration, which is probably not what you want. gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DKBUILD_BASENAME=device -c -o device.o device.c In file included from /usr/src/alsa/alsa-driver-0.9.0rc3/include/adriver.h:124, from /usr/src/alsa/alsa-driver-0.9.0rc3/include/sound/driver.h:43, from ../alsa-kernel/core/device.c:22, from device.c:2: /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: `struct isapnp_card_id' declared inside parameter list /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: its scope is only this definition or declaration, which is probably not what you want. gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DKBUILD_BASENAME=wrappers -c -o wrappers.o wrappers.c gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DKBUILD_BASENAME=sound_oss -c -o sound_oss.o sound_oss.c In file included from /usr/src/alsa/alsa-driver-0.9.0rc3/include/adriver.h:124, from /usr/src/alsa/alsa-driver-0.9.0rc3/include/sound/driver.h:43, from ../alsa-kernel/core/sound_oss.c:22, from sound_oss.c:2: /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: `struct isapnp_card_id' declared inside parameter list /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: its scope is only this definition or declaration, which is probably not what you want. gcc -DALSA_BUILD -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-0.9.0rc3/include -I/lib/modules/2.4.18/build/include -O2 -mpreferred-stack-boundary=2 -march=i386 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DKBUILD_BASENAME=info_oss -c -o info_oss.o info_oss.c In file included from /usr/src/alsa/alsa-driver-0.9.0rc3/include/adriver.h:124, from /usr/src/alsa/alsa-driver-0.9.0rc3/include/sound/driver.h:43, from ../alsa-kernel/core/info_oss.c:22, from info_oss.c:2: /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: `struct isapnp_card_id' declared inside parameter list /usr/src/alsa/alsa-driver-0.9.0rc3/include/linux/isapnp.h:368: warning: its scope is only this definition or declaration, which is probably not what you want. rm -f snd-hwdep.o ld -r -o snd-hwdep.o hwdep.o rm -f snd-pcm.o ld -r -o snd-pcm.o pcm.o pcm_native.o pcm_lib.o pcm_timer.o pcm_misc.o pcm_memory.o pcm_sgbuf.o pcm_native.o: In function `isapnp_wake': pcm_native.o(.text+0x0): multiple definition of `isapnp_wake' pcm.o(.text+0x0): first defined here pcm_native.o: In function `isapnp_device': pcm_native.o(.text+0x4): multiple definition of `isapnp_device' pcm.o(.text+0x4): first defined here pcm_native.o: In function `isapnp_activate': pcm_native.o(.text+0x8): multiple definition of `isapnp_activate' pcm.o(.text+0x8): first defined here pcm_native.o: In function `isapnp_deactivate': pcm_native.o(.text+0xc): multiple definition of `isapnp_deactivate' pcm.o(.text+0xc): first defined here pcm_native.o: In function `isapnp_find_card': pcm_native.o(.text+0x10): multiple definition of `isapnp_find_card' pcm.o(.text+0x10): first defined here pcm_native.o: In function `isapnp_find_dev': pcm_native.o(.text+0x14): multiple definition of `isapnp_find_dev' pcm.o(.text+0x14): first defined here pcm_native.o: In function `isapnp_probe_cards': pcm_native.o(.text+0x18): multiple definition of `isapnp_probe_cards' pcm.o(.text+0x18): first defined here pcm_native.o: In function `isapnp_resource_change': pcm_native.o(.text+0x1c): multiple definition of `isapnp_resource_change' pcm.o(.text+0x1c): first defined here pcm_lib.o: In function `isapnp_wake': pcm_lib.o(.text+0x0): multiple definition of `isapnp_wake' pcm.o(.text+0x0): first defined here pcm_lib.o: In function `isapnp_device': pcm_lib.o(.text+0x4): multiple definition of `isapnp_device' pcm.o(.text+0x4): first defined here pcm_lib.o: In function `isapnp_activate': pcm_lib.o(.text+0x8): multiple definition of `isapnp_activate' pcm.o(.text+0x8): first defined here pcm_lib.o: In function `isapnp_deactivate': pcm_lib.o(.text+0xc): multiple definition of `isapnp_deactivate' pcm.o(.text+0xc): first defined here pcm_lib.o: In function `isapnp_find_card': pcm_lib.o(.text+0x10): multiple definition of `isapnp_find_card' pcm.o(.text+0x10): first defined here pcm_lib.o: In function `isapnp_find_dev': pcm_lib.o(.text+0x14): multiple definition of `isapnp_find_dev' pcm.o(.text+0x14): first defined here pcm_lib.o: In function `isapnp_probe_cards': pcm_lib.o(.text+0x18): multiple definition of `isapnp_probe_cards' pcm.o(.text+0x18): first defined here pcm_lib.o: In function `isapnp_resource_change': pcm_lib.o(.text+0x1c): multiple definition of `isapnp_resource_change' pcm.o(.text+0x1c): first defined here pcm_timer.o: In function `isapnp_wake': pcm_timer.o(.text+0x0): multiple definition of `isapnp_wake' pcm.o(.text+0x0): first defined here pcm_timer.o: In function `isapnp_device': pcm_timer.o(.text+0x4): multiple definition of `isapnp_device' pcm.o(.text+0x4): first defined here pcm_timer.o: In function `isapnp_activate': pcm_timer.o(.text+0x8): multiple definition of `isapnp_activate' pcm.o(.text+0x8): first defined here pcm_timer.o: In function `isapnp_deactivate': pcm_timer.o(.text+0xc): multiple definition of `isapnp_deactivate' pcm.o(.text+0xc): first defined here pcm_timer.o: In function `isapnp_find_card': pcm_timer.o(.text+0x10): multiple definition of `isapnp_find_card' pcm.o(.text+0x10): first defined here pcm_timer.o: In function `isapnp_find_dev': pcm_timer.o(.text+0x14): multiple definition of `isapnp_find_dev' pcm.o(.text+0x14): first defined here pcm_timer.o: In function `isapnp_probe_cards': pcm_timer.o(.text+0x18): multiple definition of `isapnp_probe_cards' pcm.o(.text+0x18): first defined here pcm_timer.o: In function `isapnp_resource_change': pcm_timer.o(.text+0x1c): multiple definition of `isapnp_resource_change' pcm.o(.text+0x1c): first defined here pcm_misc.o: In function `isapnp_wake': pcm_misc.o(.text+0x0): multiple definition of `isapnp_wake' pcm.o(.text+0x0): first defined here pcm_misc.o: In function `isapnp_device': pcm_misc.o(.text+0x4): multiple definition of `isapnp_device' pcm.o(.text+0x4): first defined here pcm_misc.o: In function `isapnp_activate': pcm_misc.o(.text+0x8): multiple definition of `isapnp_activate' pcm.o(.text+0x8): first defined here pcm_misc.o: In function `isapnp_deactivate': pcm_misc.o(.text+0xc): multiple definition of `isapnp_deactivate' pcm.o(.text+0xc): first defined here pcm_misc.o: In function `isapnp_find_card': pcm_misc.o(.text+0x10): multiple definition of `isapnp_find_card' pcm.o(.text+0x10): first defined here pcm_misc.o: In function `isapnp_find_dev': pcm_misc.o(.text+0x14): multiple definition of `isapnp_find_dev' pcm.o(.text+0x14): first defined here pcm_misc.o: In function `isapnp_probe_cards': pcm_misc.o(.text+0x18): multiple definition of `isapnp_probe_cards' pcm.o(.text+0x18): first defined here pcm_misc.o: In function `isapnp_resource_change': pcm_misc.o(.text+0x1c): multiple definition of `isapnp_resource_change' pcm.o(.text+0x1c): first defined here pcm_memory.o: In function `isapnp_wake': pcm_memory.o(.text+0x0): multiple definition of `isapnp_wake' pcm.o(.text+0x0): first defined here pcm_memory.o: In function `isapnp_device': pcm_memory.o(.text+0x4): multiple definition of `isapnp_device' pcm.o(.text+0x4): first defined here pcm_memory.o: In function `isapnp_activate': pcm_memory.o(.text+0x8): multiple definition of `isapnp_activate' pcm.o(.text+0x8): first defined here pcm_memory.o: In function `isapnp_deactivate': pcm_memory.o(.text+0xc): multiple definition of `isapnp_deactivate' pcm.o(.text+0xc): first defined here pcm_memory.o: In function `isapnp_find_card': pcm_memory.o(.text+0x10): multiple definition of `isapnp_find_card' pcm.o(.text+0x10): first defined here pcm_memory.o: In function `isapnp_find_dev': pcm_memory.o(.text+0x14): multiple definition of `isapnp_find_dev' pcm.o(.text+0x14): first defined here pcm_memory.o: In function `isapnp_probe_cards': pcm_memory.o(.text+0x18): multiple definition of `isapnp_probe_cards' pcm.o(.text+0x18): first defined here pcm_memory.o: In function `isapnp_resource_change': pcm_memory.o(.text+0x1c): multiple definition of `isapnp_resource_change' pcm.o(.text+0x1c): first defined here pcm_sgbuf.o: In function `isapnp_wake': pcm_sgbuf.o(.text+0x0): multiple definition of `isapnp_wake' pcm.o(.text+0x0): first defined here pcm_sgbuf.o: In function `isapnp_device': pcm_sgbuf.o(.text+0x4): multiple definition of `isapnp_device' pcm.o(.text+0x4): first defined here pcm_sgbuf.o: In function `isapnp_activate': pcm_sgbuf.o(.text+0x8): multiple definition of `isapnp_activate' pcm.o(.text+0x8): first defined here pcm_sgbuf.o: In function `isapnp_deactivate': pcm_sgbuf.o(.text+0xc): multiple definition of `isapnp_deactivate' pcm.o(.text+0xc): first defined here pcm_sgbuf.o: In function `isapnp_find_card': pcm_sgbuf.o(.text+0x10): multiple definition of `isapnp_find_card' pcm.o(.text+0x10): first defined here pcm_sgbuf.o: In function `isapnp_find_dev': pcm_sgbuf.o(.text+0x14): multiple definition of `isapnp_find_dev' pcm.o(.text+0x14): first defined here pcm_sgbuf.o: In function `isapnp_probe_cards': pcm_sgbuf.o(.text+0x18): multiple definition of `isapnp_probe_cards' pcm.o(.text+0x18): first defined here pcm_sgbuf.o: In function `isapnp_resource_change': pcm_sgbuf.o(.text+0x1c): multiple definition of `isapnp_resource_change' pcm.o(.text+0x1c): first defined here make[1]: *** [snd-pcm.o] Error 1 make[1]: Leaving directory `/usr/src/alsa/alsa-driver-0.9.0rc3/acore' make: *** [compile] Error 1 bash-2.05a# [/code:1:e1018a032d] Ik hoop dat jullie hier iets mee kunnen Alvast bedankt Rob
  • Hm, die compile error van alsa driver 0.9Orc3 zegt me niet direct iets. Heb je alsa driver 0.9Orc5 al geprobeerd? :roll:
  • Rob van Esch, die Yamaha Soundblaster Pro compatible geluidskaart is toch een ISA geluidskaart? :roll: Ik heb met Slackware 8.1 nog het volgende getest: een ISA Soundblaster AWE32, - AWE64 en ook nog een niet PnP geluidskaart met een Jazz16 chipset, Soundblaster compatible. Deze 3 ISA kaarten bleken gewoon te werken met wat ik zei op Di Okt 15, 2002 9:36 pm [code:1:1829a611f2] ### Sound support ### # Sound Blaster Pro/16 support: /sbin/modprobe sb io=0x220 irq=5 dma=3 dma16=5 mpu_io=0x300 [/code:1:1829a611f2] Dus het weghalen van een # in /etc/rc.d/rc.modules smeets_marc, je hebt inderdaad gelijk, als ik een gewone user lid maak van groep sys dan werkt het geluid inderdaad voor die user. Maar deze user heeft dan nog steeds géén permisions voor de cdrom speler /dev/cdrom. :roll:

Beantwoord deze vraag

Weet jij het antwoord op deze vraag? Registreer of meld je aan met je account

Dit is een gearchiveerde pagina. Antwoorden is niet meer mogelijk.