Op deze website gebruiken we cookies om content en advertenties te personaliseren, om functies voor social media te bieden en om ons websiteverkeer te analyseren. Ook delen we informatie over uw gebruik van onze site met onze partners voor social media, adverteren en analyse. Deze partners kunnen deze gegevens combineren met andere informatie die u aan ze heeft verstrekt of die ze hebben verzameld op basis van uw gebruik van hun services. Meer informatie.

Akkoord

Vraag & Antwoord

OS Linux

Slackware resolutie met X

None
14 antwoorden
  • Hoi,

    Op een oude pc heb ik slackware gezet, daar heb ik alleen nog een klein lilo probleempje (een ander topic) een een probleempje met X.
    Normaal kun je resolutie wijzigen onder X door CTRL-ALT-+ te gebruiken.
    Op de een of andere mannier werkt dit niet.
    Dit vind ik erg vervelend, want nu kun je dus niet tekstverwerken, omdat de helft van de aplicatie buiten het scherm valt.
    De virtuele shermen heb ik uitgeschakeld met # , want dat eist te veel geheugen.
    Ik gebruik de goede videokaart en onder windows kan ik probleemloos 1024x768 halen.
    Het betreft een oude compaq deskpro p120.

    De xinitrc ziet er zo uit :
    [code:1:0e6e8fcb04]
    # File generated by xf86config.

    #
    # Copyright (c) 1999 by The XFree86 Project, Inc.
    #
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    #
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    #
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    #
    # Except as contained in this notice, the name of the XFree86 Project shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from the
    # XFree86 Project.
    #

    # **********************************************************************
    # Refer to the XF86Config(4/5) man page for details about the format of
    # this file.
    # **********************************************************************

    # **********************************************************************
    # Module section – this section is used to specify
    # which dynamically loadable modules to load.
    # **********************************************************************
    #
    Section "Module"

    # This loads the DBE extension module.

    Load "dbe" # Double buffer extension

    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection

    # This loads the Type1 and FreeType font modules
    Load "type1"
    Load "freetype"

    # This loads the GLX module
    # Load "glx"

    EndSection

    # **********************************************************************
    # Files section. This allows default font and rgb paths to be set
    # **********************************************************************

    Section "Files"

    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.

    RgbPath "/usr/X11R6/lib/X11
    gb"

    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    #
    # If you don't have a floating point coprocessor and emacs, Mosaic or other
    # programs take long to start up, try moving the Type1 and Speedo directory
    # to the end of this list (or comment them out).
    #

    FontPath "/usr/X11R6/lib/X11/fonts/local/"
    FontPath "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
    # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

    # The module search path. The default path is shown here.

    # ModulePath "/usr/X11R6/lib/modules"

    EndSection

    # **********************************************************************
    # Server flags section.
    # **********************************************************************

    Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging

    # Option "NoTrapSignals"

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.

    # Option "DontZap"

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.

    # Option "Dont Zoom"

    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.

    # Option "DisableVidModeExtension"

    # Uncomment this to enable the use of a non-local xvidtune client.

    # Option "AllowNonLocalXvidtune"

    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.

    # Option "DisableModInDev"

    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).

    # Option "AllowNonLocalModInDev"

    EndSection

    # **********************************************************************
    # Input devices
    # **********************************************************************

    # **********************************************************************
    # Core keyboard's InputDevice section
    # **********************************************************************

    Section "InputDevice"

    Identifier "Keyboard1"
    Driver "Keyboard"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.

    # Option "Protocol" "Xqueue"

    Option "AutoRepeat" "500 30"

    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"

    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"

    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc102"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"

    # These are the default XKB settings for XFree86
    # Option "XkbRules" "xfree86"
    # Option "XkbModel" "pc101"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""

    # Option "XkbDisable"

    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc101"
    Option "XkbLayout" "us"

    EndSection


    # **********************************************************************
    # Core Pointer's InputDevice section
    # **********************************************************************

    Section "InputDevice"

    # Identifier and driver

    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "PS/2"
    Option "Device" "/dev/mouse"

    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.

    # Option "Protocol" "Xqueue"

    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.

    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"

    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"

    # ChordMiddle is an option for some 3-button Logitech mice

    # Option "ChordMiddle"

    EndSection


    # **********************************************************************
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the XF86Config man page for a description of the options.
    # **********************************************************************
    #
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection

    # **********************************************************************
    # Monitor section
    # **********************************************************************

    # Any number of monitor sections may be present

    Section "Monitor"

    Identifier "compaq V50 monitor"

    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync 31.0 - 60.0

    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-115

    EndSection


    # **********************************************************************
    # Graphics device section
    # **********************************************************************

    # Any number of graphics device sections may be present

    # Standard VGA Device:

    #Section "Device"
    # Identifier "Standard VGA"
    # VendorName "Unknown"
    # BoardName "Unknown"

    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.

    # Chipset "generic"

    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.

    # Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.

    # BusID "PCI:0:10:0"

    # VideoRam 256

    # Clocks 25.2 28.3

    #EndSection

    # Device configured by xf86config:

    Section "Device"
    Identifier "Cirrus Log"
    Driver "cirrus"
    VideoRam 1024
    # Device section for Cirrus Logic GD5430/34-based cards.
    #MemBase 0x00e00000 # ISA card that maps to 14Mb
    #MemBase 0x04000000 # VLB card that maps to 64Mb
    #MemBase 0x80000000 # VLB card that maps to 2048Mb
    #MemBase 0x02000000 # VLB card that maps to 32Mb
    #Option "linear"
    # Use Option "no_bitblt" if you have graphics problems. If that fails
    # try Option "noaccel".
    # Refer to /usr/X11R6/lib/doc/README.cirrus.
    # To allow linear addressing, uncomment the Option line and the
    # address that the card maps the framebuffer to.
    # Insert Clocks lines here if appropriate
    EndSection


    # **********************************************************************
    # Screen sections
    # **********************************************************************

    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "Cirrus Log"
    Monitor "compaq V50 monitor"
    DefaultDepth 16

    Subsection "Display"
    Depth 8
    Modes "640x480" "800x600" "1024x768"
    ViewPort 0 0
    # Virtual 1024 768
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "640x480" "800x600" "1024x768"
    ViewPort 0 0
    # Virtual 800 600
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "640x480"
    ViewPort 0 0
    # Virtual 640 480
    EndSubsection
    EndSection

    # **********************************************************************
    # ServerLayout sections.
    # **********************************************************************

    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.

    Section "ServerLayout"

    # The Identifier line must be present
    Identifier "Simple Layout"

    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.

    Screen "Screen 1"

    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

    EndSection
    [/code:1:0e6e8fcb04]

    Het is slackware 8.0, wat moet ik doen om de resolutie te kunnen bepalen ?
  • Oeps foutje gemaakt, het is natuurlijk XF86Config :oops:
    Het is ook een grote lap tekst…groter dan ik dacht…moet ik hem iets inkorten ?
  • Oeps, nu weer een dubbele post :oops:

    Murphy's law ?
  • Ben ook geen expert met X configureren….. maar klopt je monitor sectie wel. Speek eens wat met die eerste freq range.
  • Hmm, je zou de volgorde van de modus in screen sections kunnen wijzigen. Omdat [b:4178d72f92] DefaultDepth 16 [/b:4178d72f92] is, wijzig je
    [quote:4178d72f92]
    Subsection "Display"
    Depth 16
    Modes "640x480" "800x600" "1024x768"
    [/quote:4178d72f92] in [code:1:4178d72f92]
    Subsection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    [/code:1:4178d72f92]
  • De monitor gegevens kloppen, want deze heb ik opgezocht.
    De resolutie volgorde veranderen heb ik geprobeerd, maar hij blijft in de lage resolutie waar hij nu ook mee start.

    In de errorlog wordt volgens mij niks noemenswaardig vermeld van errors over een te hoge resolutie…

    Maar het is toch ook vreemd dat de CTRL ALT + combinatie niet werkt ?
  • [quote:e26125af01="bvvelde"]Maar het is toch ook vreemd dat de CTRL ALT + combinatie niet werkt ?[/quote:e26125af01] Inderdaad, ik heb op LinuxQuestions.org een
    discussie
    gevonden, met net zo een resolutie probleem als jij hebt, maar dan met Slackware 8.1 :roll:
  • Bedankt !

    Het is een soort gelijk probleem met een videokaart van de zelfde fabrikant (niet hetzelfde type).

    Heb mischien het probleem gevonden.
    Er zit maar 1 mb videogeheugen op de kaart en dat is te weinig voor 800x600 en hoger ?

    Dit vind ik erg vreemd, want onder windows hal ik dat wel zonder problemen.
    Toch nog even de log met enkele sutkje er uit geknipt (hij is erg lang).
    [code:1:4e8b87445c]

    XFree86 Version 4.1.0 / X Window System
    (protocol Version 11, revision 0, vendor release 6510)
    Release Date: 2 June 2001
    If the server is older than 6-12 months, or if your card is
    newer than the above date, look for a newer version before
    reporting problems. (See http://www.XFree86.Org/FAQ)
    Build Operating System: Linux 2.2.19 i686 [ELF]
    Module Loader present
    (==) Log file: "/var/log/XFree86.0.log", Time: Sat Jun 7 21:51:05 2003
    (==) Using config file: "/etc/X11/XF86Config"
    Markers: (–) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) ServerLayout "Simple Layout"
    (**) |–>Screen "Screen 1" (0)
    (**) | |–>Monitor "compaq V50 monitor"
    (**) | |–>Device "Cirrus Log"
    (**) |–>Input Device "Mouse1"
    (**) |–>Input Device "Keyboard1"

    <—————————————–<Knip>——————————————->

    (WW) Cannot open APM
    (II) Module ABI versions:
    XFree86 ANSI C Emulation: 0.1
    XFree86 Video Driver: 0.4
    XFree86 XInput driver : 0.2
    XFree86 Server Extension : 0.1
    XFree86 Font Renderer : 0.2
    (II) Loader running on linux
    (II) LoadModule: "bitmap"

    —————————————–<Knip>——————————————->

    (II) Bus -1 non-prefetchable memory range:
    (II) Bus -1 prefetchable memory range:
    (–) PCI:*(0:15:0) Cirrus Logic GD5436 rev 0, Mem @ 0x40000000/24
    (II) Addressable bus resource ranges are
    [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
    [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) OS-reported resource ranges:
    [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
    (II) Active PCI resource ranges:
    [0] -1 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
    [1] -1 0x00001000 - 0x000010ff (0x100) IX[B]E
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
    [1] -1 0x00001000 - 0x000010ff (0x100) IX[B]E
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
    [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
    [6] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [7] -1 0x00000000 - 0x000000ff (0x100) IX[B]
    [8] -1 0x00001000 - 0x000010ff (0x100) IX[B]E

    —————————————–<Knip>——————————————->

    (II) Loading font FreeType
    (II) LoadModule: "cirrus"
    (II) Loading /usr/X11R6/lib/modules/drivers/cirrus_drv.o
    (II) Module cirrus: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    Module class: XFree86 Video Driver
    ABI class: XFree86 Video Driver, version 0.4
    (II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8,
    CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD,
    CL-GD5465, CL-GD7548
    (II) Primary Device is: PCI 00:0f:0
    (–) Assigning device section with no busID to primary device
    (–) Chipset CLGD5436 found
    (II) Loading sub module "cirrus_alpine"
    (II) LoadModule: "cirrus_alpine"
    (II) Loading /usr/X11R6/lib/modules/drivers/cirrus_alpine.o
    (II) Module cirrus_alpine: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.4
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
    [6] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [7] -1 0x00000000 - 0x000000ff (0x100) IX[B]
    [8] -1 0x00001000 - 0x000010ff (0x100) IX[B]E
    (II) resource ranges after probing:
    [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
    [6] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
    [7] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
    [8] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
    [9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [10] -1 0x00000000 - 0x000000ff (0x100) IX[B]
    [11] -1 0x00001000 - 0x000010ff (0x100) IX[B]E
    [12] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
    [13] 0 0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Setting vga for screen 0.
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/X11R6/lib/modules/libvgahw.a
    (II) Module vgahw: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.4
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
    (II) Module int10: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.4
    (II) CIRRUS(0): initializing int10
    (II) CIRRUS(0): Primary V_BIOS segment is: 0xc000
    (**) CIRRUS(0): Depth 16, (–) framebuffer bpp 16
    (==) CIRRUS(0): RGB weight 565
    (==) CIRRUS(0): Default visual is TrueColor
    (==) CIRRUS(0): Using SW cursor
    (–) CIRRUS(0): Linear framebuffer at 0x40000000
    (EE) CIRRUS(0): No valid MMIO address in PCI config space
    (–) CIRRUS(0): Not Using MMIO
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Loading /usr/X11R6/lib/modules/libi2c.a
    (II) Module i2c: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.2.0
    ABI class: XFree86 Video Driver, version 0.4
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Loading /usr/X11R6/lib/modules/libddc.a
    (II) Module ddc: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.4
    (EE) CIRRUS(0): I2C initialization failed
    (==) CIRRUS(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) CIRRUS(0): VideoRAM: 1024 kByte
    (==) CIRRUS(0): Min pixel clock is 12 MHz
    (–) CIRRUS(0): Max pixel clock is 50 MHz
    (II) CIRRUS(0): compaq V50 monitor: Using hsync range of 31.00-60.00 kHz
    (II) CIRRUS(0): compaq V50 monitor: Using vrefresh range of 50.00-115.00 Hz
    (II) CIRRUS(0): Clock range: 12.00 to 50.00 MHz
    (II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
    (II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1152x864" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1280x960" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1280x960" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1792x1344" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1792x1344" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1856x1392" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1856x1392" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode)
    (II) CIRRUS(0): Not using default mode "800x600" (no mode of this name)
    (II) CIRRUS(0): Not using mode "1024x768" (no mode of this name)
    (–) CIRRUS(0): Virtual size is 640x480 (pitch 640)
    (**) CIRRUS(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
    (II) CIRRUS(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
    (==) CIRRUS(0): DPI set to (75, 75)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/X11R6/lib/modules/libfb.a
    (II) Module fb: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    ABI class: XFree86 ANSI C Emulation, version 0.1
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/X11R6/lib/modules/libxaa.a
    (II) Module xaa: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.4
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 0 0x40000000 - 0x40ffffff (0x1000000) MX[B]
    [1] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [2] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [3] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [4] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
    [5] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [6] -1 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
    [7] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
    [8] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
    [9] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
    [10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [11] -1 0x00000000 - 0x000000ff (0x100) IX[B]
    [12] -1 0x00001000 - 0x000010ff (0x100) IX[B]E
    [13] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
    [14] 0 0x000003c0 - 0x000003df (0x20) IS[B]
    (WW) System lacks support for changing MTRRs
    (II) CIRRUS(0): Using 339 lines for offscreen memory
    (II) CIRRUS(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    Solid Horizontal and Vertical Lines
    DGAINIT
    (==) CIRRUS(0): Silken mouse enabled
    (II) Setting vga for screen 0.
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension LBX
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (**) Option "Protocol" "PS/2"
    (**) Mouse1: Protocol: "PS/2"
    (**) Option "CorePointer"
    (**) Mouse1: Core Pointer
    (**) Option "Device" "/dev/mouse"
    (==) Mouse1: Buttons: 3
    (**) Option "Emulate3Buttons"
    (**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
    (II) Keyboard "Keyboard1" handled by legacy driver
    (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
    Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
    [/code:1:4e8b87445c]

    O, en waarom die rollende oogjes …. heb ik iets stoms gezegd ?
    Als dat zo is dan spijt me dat.

    Bedankt,
  • [quote:e506273e5d="bvvelde"] videokaart van de zelfde fabrikant (niet hetzelfde type). [/quote:e506273e5d] Wat gaf bij jou dan [code:1:e506273e5d] lspci -vv [/code:1:e506273e5d] voor een ouput voor je videokaart?
    [quote:e506273e5d] Er zit maar 1 mb videogeheugen op de kaart en dat is te weinig voor 800x600 en hoger ? [/quote:e506273e5d] Daar heb ik ook aan gedacht. Ik heb hier ook nog een oude PC (Pentium 166 MMX 64 MB RAM) die ik niet zo vaak meer gebruik, met daar in een oude Trident 9685 met 2 MB video geheugen. Op die PC werkt de 1024x768 bij 16 bit kleuren wel. (Slackware 9.0 met de standaard [b:e506273e5d] vesa [/b:e506273e5d] driver.)
    Bij jou geeft [quote:e506273e5d] (II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode) [/quote:e506273e5d] uit jouw /var/log/XFree86.0.log de indruk dat 1 MB video geheugen te weinig is. Of dit zo is kun je controleren door tijdelijk 8 bit kleuren te proberen.
    [quote:e506273e5d] O, en waarom die rollende oogjes …. heb ik iets stoms gezegd ? [/quote:e506273e5d] Nee hoor, de rollende oogjes hebben geen bijbetekenis. Ik heb 'm gebruikt ipv een punt. :wink:
  • [quote:ceb3c56d31]
    Nee hoor, de rollende oogjes hebben geen bijbetekenis. Ik heb 'm gebruikt ipv een punt.
    [/quote:ceb3c56d31]
    Ha, gelukkig …

    Toch nog even terug naar het resolutie probleem.
    Als 1 mb te weinig is voor 1024x768 kan ik me indenken, maar ook 800x600 is nog te veel van het goede.
    Daar zie je een error die ik niet kan verklaren.

    [quote:ceb3c56d31]
    EE) CIRRUS(0): I2C initialization failed
    (==) CIRRUS(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) CIRRUS(0): VideoRAM: 1024 kByte
    (==) CIRRUS(0): Min pixel clock is 12 MHz
    (–) CIRRUS(0): Max pixel clock is 50 MHz
    (II) CIRRUS(0): compaq V50 monitor: Using hsync range of 31.00-60.00 kHz
    (II) CIRRUS(0): compaq V50 monitor: Using vrefresh range of 50.00-115.00 Hz
    (II) CIRRUS(0): Clock range: 12.00 to 50.00 MHz
    (II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
    [/quote:ceb3c56d31]

    De clock waarvan, videokaart of monitor ?

    Neemt X dan zoveel meer geheugen dan windows ?
  • [quote:775274b940="bvvelde"] Daar zie je een error die ik niet kan verklaren. [/quote:775274b940]
    Een verklaring hiervoor heb ik ook niet.
    [quote:775274b940] De clock waarvan, videokaart of monitor [/quote:775274b940] videokaart.
    [quote:775274b940]Neemt X dan zoveel meer geheugen dan windows ?[/quote:775274b940] Zou hetzelfde moeten zijn.
    Hier een quote uit http://www.xmission.com/~howardm/Xwoes.html
    [quote:775274b940]
    IMPORTANT TIP: The amount of videoram your card has limits the resolution and color depth you may have. Here is a general guide:

    Bytes of videoram required = ( X resolution x Y resolution x bits-per-pixel ) / 8

    For example, I require : ( 1024 x 768 x 16) / 8 = 1.57 Mb . Thus, I need at * least * a 2Mb card. So, do not try to stipulate a combination of resolution and color depth your videocard will not support - the associated modelines will simply be rejected.
    [/quote:775274b940]
  • Ja, 1024 zal dan wel te veel van het goede zijn voor deze kaart, maar dat geeft niet.
    Als ik 800x600 zou kunnen draaien zou al een hele verbetering zijn en dat zou hij moeten kunnen halen.
    Alleen dat lukt ook niet.
    Dit staat in de log :
    [code:1:cbefb4928a]
    (II) CIRRUS(0): Clock range: 12.00 to 50.00 MHz
    (II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
    [/code:1:cbefb4928a]
    Ik gebruik de goede driver, want het betreft een 'Cirrus Logic CL-GD5436'-videokaart met 1mb geheugen (pci).
    Dan zou je zeggen dat de clock en dergelijke goed moeten zijn…
  • Hmm, je bedoelt zeker de cirrus driver van de Slackware distro zelf?
    Je zou het nog kunnen proberen als root met
    [code:1:bb0c514f07] xf86cfg [/code:1:bb0c514f07] Het beste kun je wel eerst een backup maken van je /etc/X11/XF86Config
    Houd de gegevens van je monitor bij de hand. Probeer eventueel een lagere RefreshRate.
  • Bedankt voor alle hulp, maar ik vrees dat ik dit niet voorelkaar ga krijgen.
    Na hele zoektochten ben ik er wel achter dat deze kaart nogal wat problemen oplevert onder linux.
    Alles heb ik geprobeerd wat er werd aangeraden.
    Ik kan nu in 8bpp wel 1024x768 halen, het ziet er dan niet mooi uit, maar het werkt wel.
    800x600 zou ik in 16bpp nog wel moeten kunnen halen, maar toch lukt dat niet….jammer.

    Ik ga me nu richten op mijn lilo probleempje en wil zo snel mogenlijk de netwerk functionaliteit werkend hebben.

Beantwoord deze vraag

Dit is een gearchiveerde pagina. Antwoorden is niet meer mogelijk.