Op deze website gebruiken we cookies om content en advertenties te personaliseren, om functies voor social media te bieden en om ons websiteverkeer te analyseren. Ook delen we informatie over uw gebruik van onze site met onze partners voor social media, adverteren en analyse. Deze partners kunnen deze gegevens combineren met andere informatie die u aan ze heeft verstrekt of die ze hebben verzameld op basis van uw gebruik van hun services. Meer informatie.

Akkoord

Vraag & Antwoord

OS Linux

[Mandrake 9.1] X Window start niet op?

None
59 antwoorden
  • hallo
    ik heb van iemand al gehoord hoe ik hem handmatig moet opstarten maar daarvoor moest ik eerst een blauw scherm zien en die zie ik niet meer en als ik op ctr-alt-f7 druk krijg ik een zwart scherm en kan ik er niksin doen weten jullie raad??

    alvast bedankt Boyo
  • Met deze info kunnen wij je echt niet helpen.

    Wat heb je gedaan?
    Welke distro gebruik je?
    Hoe lang gebruik je al GNU/Linux?
    Werkte het eerst wel goed?

    Als ik zo even gok wat je bedoeld moet in in /etc/inittab het defaultrunlevel van 3 naar 5 zetten of in geval van Slackware naar 4.
  • [quote:d7b37e7335="Boyo"]hallo
    ik heb van iemand al gehoord hoe ik hem handmatig moet opstarten maar daarvoor moest ik eerst een blauw scherm zien en die zie ik niet meer en als ik op ctr-alt-f7 druk krijg ik een zwart scherm en kan ik er niksin doen weten jullie raad??

    alvast bedankt Boyo[/quote:d7b37e7335]
    X Window draait op tty7, dus met die toetsencombi kom je nergens.

    Doe ctrl+alt+f2 als je uit X Window wilt komen.

    vertel ook even welke videokaart je hebt

    Max
  • ik heb mandrake 9.1
    ik heb er nog nooit mee gewerkt ik heb het gister of eergister geinstalleerd en het is gelijk fout gegaan
    en ik weet niet welke video kaart ik heb (waar kan je dat zien)?

    groetjes Boyo
  • [quote:44b7ac9633="Boyo"] en ik weet niet welke video kaart ik heb (waar kan je dat zien)? [/quote:44b7ac9633] zou je de output kunnen posten van je [code:1:44b7ac9633] /usr/bin/lspci -tv [/code:1:44b7ac9633]
  • ik denk dat mijn video kaart is [trio 3d/2x] kan dat kloppen??
    ik hoop dat jullie me nu verder kunnen helpen

    Boyo
  • Als je met dat zwarte scherm Linux tekst mode bedoelt, log dan in als root, en typ
    [code:1:3da70a5a93] XFdrake [/code:1:3da70a5a93] [Enter] grafische kaart is dan al voorgeselecteerd. Nu kun je met de Page Up en Page Down en de pijljes toetsen, de juiste X-server selecteren. Je selecteerd eerst S3 [Enter] dan Trio3D/2. Dan Tab je naar OK [Enter] Dan wordt waarschijnlijk gevraagd naar Mandrake install CD1.
  • hallo het is nog steeds niet gelukt
    er staat unknown error loading module
    en dat 3 keer onder elkaar

    en dan config error: /etc/X11/XF86Config:61

    X10: fatal I0 error 104 (connection reset by peer ) on x server ":0.0"
    alfter 0 requests (o known processed ) with 0 events remaining

    ik snap er niks meer van Groetjes Boyo
  • config error: /etc/X11/XF86Config:61

    We komen ergens, deze foutmelding geeft aan dat het bestand /etc/X11/XF86Config:61 op regel 61 een fout bevat.
    Post de inhoud van dat bestand eventjes, dan kunnen we zien wat er loos is..

    Max
  • ik zou niet weten hoe ik dat bestand moet openen
    ls /etc/X11/XF86Config:61 ofzo?
    ik heb nog nooit met linux gewerkt

    Groetjes Boyo
  • [quote:8f6c9fb5e2="Boyo"]ik zou niet weten hoe ik dat bestand moet openen
    [/quote:8f6c9fb5e2]
    Hmm, wordt tijd dat je wat documentatie over Linux doorneemt..
    [quote:8f6c9fb5e2]
    ls /etc/X11/XF86Config:61 ofzo?
    [/quote:8f6c9fb5e2]
    ls is de Linuxtegenhanger dan DIR, dus die laat de inhoud van een map zien. Verder heet het bestand geen XF86Config:61, maar XF86Config

    Je kunt met het programma [b:8f6c9fb5e2]more[/b:8f6c9fb5e2] de tekst van dit bestand lezen, doe even [b:8f6c9fb5e2]more /etc/X11/XF86Config[/b:8f6c9fb5e2]. Met de toets [enter] kun je vervolgens door het document bladeren.
    Maar het lijkt me handiger om het bestand even te kopieren naar de pc/partitie waarmee je op internet zit, zodat je het bestand hier kunt plaatsen.
    Dat kun je doen mbv een floppy:
    [b:8f6c9fb5e2]floppy er in steken
    mount /mnt/floppy
    cp /etc/X11/XF86Config /mnt/floppy
    umount /mnt/floppy
    [/b:8f6c9fb5e2]
    Open het bestand in een capabele editor (dus geen notepad) en post de inhoud in deze groep..

    Max
  • oke het is wel veel maar hier is et
    # File generated by xf86config.

    #
    # Copyright © 1999 by The XFree86 Project, Inc.
    #
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    #
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    #
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    #
    # Except as contained in this notice, the name of the XFree86 Project shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from the
    # XFree86 Project.
    #

    # **********************************************************************
    # Refer to the XF86Config(4/5) man page for details about the format of
    # this file.
    # **********************************************************************

    # **********************************************************************
    # Module section – this section is used to specify
    # which dynamically loadable modules to load.
    # **********************************************************************
    #

    Section "Module"
    # This loads the DBE extension module.

    Load "dbe" # Double buffer extension

    # This loads the Type1 and FreeType font modules
    Load "type1"
    Load "speedo"

    # Load "freetype"
    # Load "xtt"

    # This loads the GLX module
    # Load "glx"
    # This loads the DRI module
    # Load "dri"

    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.

    Subsection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubsection
    EndSection
    # **********************************************************************
    # Files section. This allows default font and rgb paths to be set
    # **********************************************************************

    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.

    RgbPath "/usr/X11R6/lib/X11
    gb"

    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    #
    # If you don't have a floating point coprocessor and emacs, Mosaic or other
    # programs take long to start up, try moving the Type1 and Speedo directory
    # to the end of this list (or comment them out).
    #

    # FontPath "/usr/X11R6/lib/X11/fonts/local/"
    FontPath "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1/"

    # FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
    # FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.

    # ModulePath "/usr/X11R6/lib/modules"
    EndSection
    # **********************************************************************
    # Server flags section.
    # **********************************************************************

    Section "ServerFlags"
    EndSection
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging

    # Option "NoTrapSignals"

    # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.

    # Option "DontVTSwitch"

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.

    # Option "DontZap"

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.

    # Option "Dont Zoom"

    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.

    # Option "DisableVidModeExtension"

    # Uncomment this to enable the use of a non-local xvidtune client.

    # Option "AllowNonLocalXvidtune"

    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.

    # Option "DisableModInDev"

    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).

    # Option "AllowNonLocalModInDev"
    # **********************************************************************
    # Input devices
    # **********************************************************************

    # **********************************************************************
    # Core keyboard's InputDevice section
    # **********************************************************************

    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "Keyboard"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "nl"

    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.

    # Option "Protocol" "Xqueue"

    Option "AutoRepeat" "500 30"

    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"

    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"

    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc102"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"

    # These are the default XKB settings for XFree86
    # Option "XkbRules" "xfree86"
    # Option "XkbModel" "pc101"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""

    # Option "XkbDisable"

    Option "XkbRules" "xfree86"
    EndSection
    # **********************************************************************
    # Core Pointer's InputDevice section
    # **********************************************************************

    Section "InputDevice"
    # Identifier and driver

    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "PS/2"
    Option "Device" "/dev/mouse"

    # Mouse-speed setting for PS/2 mouse.

    # Option "Resolution" "256"

    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.

    # Option "Protocol" "Xqueue"

    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.

    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"

    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"

    # ChordMiddle is an option for some 3-button Logitech mice

    # Option "ChordMiddle"
    EndSection

    Section "Monitor"
    Identifier "monitor1"
    VendorName "Belinea"
    ModelName "Belinea 105590"
    HorizSync 30.0-85.0
    VertRefresh 50.0-120.0

    # Sony Vaio C1(X,XS,VE,VN)?
    # 1024x480 @ 85.6 Hz, 48 kHz hsync
    ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync

    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616

    # This is a set of standard mode timings. Modes that are out of monitor spec
    # are automatically deleted by the server (provided the HorizSync and
    # VertRefresh lines are correct), so there's no immediate need to
    # delete mode timings (unless particular mode timings don't work on your
    # monitor). With these modes, the best standard mode that your monitor
    # and video card can support for a given resolution is automatically
    # used.

    # 640x400 @ 70 Hz, 31.5 kHz hsync
    ModeLine "640x400" 25.175 640 664 760 800 400 409 411 450

    # 640x480 @ 60 Hz, 31.5 kHz hsync
    ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525

    # 800x600 @ 56 Hz, 35.15 kHz hsync
    ModeLine "800x600" 36 800 824 896 1024 600 601 603 625

    # 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
    ModeLine "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace

    # 640x400 @ 85 Hz, 37.86 kHz hsync
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync

    # 640x480 @ 75 Hz, 37.50 kHz hsync
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync

    # 800x600 @ 60 Hz, 37.8 kHz hsync
    ModeLine "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync

    # 640x480 @ 85 Hz, 43.27 kHz hsync
    ModeLine "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync

    # 1152x864 @ 89 Hz interlaced, 44 kHz hsync
    ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace

    # 800x600 @ 72 Hz, 48.0 kHz hsync
    ModeLine "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync

    # 1024x768 @ 60 Hz, 48.4 kHz hsync
    ModeLine "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync

    # 640x480 @ 100 Hz, 53.01 kHz hsync
    ModeLine "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync

    # 1152x864 @ 60 Hz, 53.5 kHz hsync
    ModeLine "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync

    # 800x600 @ 85 Hz, 55.84 kHz hsync
    ModeLine "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync

    # 1024x768 @ 70 Hz, 56.5 kHz hsync
    ModeLine "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync

    # 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
    ModeLine "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace

    # 800x600 @ 100 Hz, 64.02 kHz hsync
    ModeLine "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync

    # 1024x768 @ 76 Hz, 62.5 kHz hsync
    ModeLine "1024x768" 85 1024 1032 1152 1360 768 784 787 823

    # 1152x864 @ 70 Hz, 62.4 kHz hsync
    ModeLine "1152x864" 92 1152 1208 1368 1474 864 865 875 895

    # 1280x1024 @ 61 Hz, 64.2 kHz hsync
    ModeLine "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054

    # 1400x1050 @ 60 Hz, 65.5 kHz
    ModeLine "1400x1050" 122.0 1400 1488 1640 1880 1050 1052 1064 1082 +HSync +VSync

    # 1024x768 @ 85 Hz, 70.24 kHz hsync
    ModeLine "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync

    # 1152x864 @ 78 Hz, 70.8 kHz hsync
    ModeLine "1152x864" 110 1152 1240 1324 1552 864 864 876 908

    # 1280x1024 @ 70 Hz, 74.59 kHz hsync
    ModeLine "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync

    # 1600x1200 @ 60Hz, 75.00 kHz hsync
    ModeLine "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync

    # 1152x864 @ 84 Hz, 76.0 kHz hsync
    ModeLine "1152x864" 135 1152 1464 1592 1776 864 864 876 908

    # 1280x1024 @ 75 Hz, 79.98 kHz hsync
    ModeLine "1280x1024" 135 1280 1296 1440 1688 1024 1025 1028 1066 +HSync +VSync

    # 1024x768 @ 100Hz, 80.21 kHz hsync
    ModeLine "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync

    # 1400x1050 @ 75 Hz, 82.2 kHz hsync
    ModeLine "1400x1050" 155.8 1400 1464 1784 1912 1050 1052 1064 1090 +HSync +VSync

    # 1600x1200 @ 70 Hz, 87.50 kHz hsync
    ModeLine "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync

    # 1152x864 @ 100 Hz, 89.62 kHz hsync
    ModeLine "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync

    # 1280x1024 @ 85 Hz, 91.15 kHz hsync
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync

    # 1600x1200 @ 75 Hz, 93.75 kHz hsync
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync

    # 1600x1200 @ 85 Hz, 105.77 kHz hsync
    ModeLine "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync

    # 1600x1200 @ 85 Hz, 106.3 kHz hsync
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync

    # 1280x1024 @ 100 Hz, 107.16 kHz hsync
    ModeLine "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync

    # 1800x1440 @ 64Hz, 96.15 kHz hsync
    ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync

    # 1800x1440 @ 70Hz, 104.52 kHz hsync
    ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync

    # 1920x1440 @ 60 Hz, 90.0 kHz hsync
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -HSync +VSync

    # 1920x1440 @ 75 Hz, 112.5kHz hsync
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -HSync +VSync

    # 512x384 @ 78 Hz, 31.50 kHz hsync
    ModeLine "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync

    # 512x384 @ 85 Hz, 34.38 kHz hsync
    ModeLine "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync

    # Low-res Doublescan modes
    # If your chipset does not support doublescan, you get a 'squashed'
    # resolution like 320x400.

    # 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
    ModeLine "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan

    # 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
    ModeLine "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan

    # 320x240 @ 72 Hz, 36.5 kHz hsync
    ModeLine "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan

    # 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
    ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan

    # 400x300 @ 60 Hz, 37.8 kHz hsync
    ModeLine "400x300" 20 400 416 480 528 300 301 303 314 Doublescan

    # 400x300 @ 72 Hz, 48.0 kHz hsync
    ModeLine "400x300" 25 400 424 488 520 300 319 322 333 Doublescan

    # 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
    ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan

    # 480x300 @ 60 Hz, 37.8 kHz hsync
    ModeLine "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan

    # 480x300 @ 63 Hz, 39.6 kHz hsync
    ModeLine "480x300" 25 480 496 576 632 300 301 303 314 Doublescan

    # 480x300 @ 72 Hz, 48.0 kHz hsync
    ModeLine "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan
    EndSection

    Section "Device"
    Identifier "device1"
    BoardName "S3 Trio3D/2X"
    Option "power_saver"
    # Option "no_accel" # You may enable this if there are timeouts when starting X
    EndSection

    Section "Screen"
    Driver "svga"
    Device "device1"
    Monitor "monitor1"
    DefaultColorDepth 32

    Subsection "Display"
    Depth 8
    Modes "640x480"
    EndSubsection

    Subsection "Display"
    Depth 15
    Modes "640x480"
    EndSubsection

    Subsection "Display"
    Depth 16
    Modes "640x480"
    EndSubsection

    Subsection "Display"
    Depth 24
    Modes "640x480"
    EndSubsection

    Subsection "Display"
    Depth 32
    Modes "640x480"
    EndSubsection
    EndSection
    # **********************************************************************
    # ServerLayout sections.
    # **********************************************************************

    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.

    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"

    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.

    Screen "Screen 1"
    EndSection
    # File generated by xf86config.

    #
    # Copyright © 1999 by The XFree86 Project, Inc.
    #
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    #
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    #
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    #
    # Except as contained in this notice, the name of the XFree86 Project shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from the
    # XFree86 Project.
    #

    # **********************************************************************
    # Refer to the XF86Config(4/5) man page for details about the format of
    # this file.
    # **********************************************************************

    # **********************************************************************
    # Module section – this section is used to specify
    # which dynamically loadable modules to load.
    # **********************************************************************
    #

    Section "Module"
    # This loads the DBE extension module.

    Load "dbe" # Double buffer extension

    # This loads the Type1 and FreeType font modules
    Load "type1"
    Load "speedo"

    # Load "freetype"
    # Load "xtt"

    # This loads the GLX module
    # Load "glx"
    # This loads the DRI module
    # Load "dri"

    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.

    Subsection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubsection
    EndSection
    # **********************************************************************
    # Files section. This allows default font and rgb paths to be set
    # **********************************************************************

    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.

    RgbPath "/usr/X11R6/lib/X11
    gb"

    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    #
    # If you don't have a floating point coprocessor and emacs, Mosaic or other
    # programs take long to start up, try moving the Type1 and Speedo directory
    # to the end of this list (or comment them out).
    #

    # FontPath "/usr/X11R6/lib/X11/fonts/local/"
    FontPath "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1/"

    # FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
    # FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.

    # ModulePath "/usr/X11R6/lib/modules"
    EndSection
    # **********************************************************************
    # Server flags section.
    # **********************************************************************

    Section "ServerFlags"
    EndSection
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging

    # Option "NoTrapSignals"

    # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.

    # Option "DontVTSwitch"

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.

    # Option "DontZap"

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.

    # Option "Dont Zoom"

    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.

    # Option "DisableVidModeExtension"

    # Uncomment this to enable the use of a non-local xvidtune client.

    # Option "AllowNonLocalXvidtune"

    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.

    # Option "DisableModInDev"

    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).

    # Option "AllowNonLocalModInDev"
    # **********************************************************************
    # Input devices
    # **********************************************************************

    # **********************************************************************
    # Core keyboard's InputDevice section
    # **********************************************************************

    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "Keyboard"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "nl"

    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.

    # Option "Protocol" "Xqueue"

    Option "AutoRepeat" "500 30"

    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"

    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"

    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc102"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"

    # These are the default XKB settings for XFree86
    # Option "XkbRules" "xfree86"
    # Option "XkbModel" "pc101"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""

    # Option "XkbDisable"

    Option "XkbRules" "xfree86"
    EndSection
    # **********************************************************************
    # Core Pointer's InputDevice section
    # **********************************************************************

    Section "InputDevice"
    # Identifier and driver

    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "PS/2"
    Option "Device" "/dev/mouse"

    # Mouse-speed setting for PS/2 mouse.

    # Option "Resolution" "256"

    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.

    # Option "Protocol" "Xqueue"

    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.

    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"

    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"

    # ChordMiddle is an option for some 3-button Logitech mice

    # Option "ChordMiddle"
    EndSection

    Section "Monitor"
    Identifier "monitor1"
    VendorName "Belinea"
    ModelName "Belinea 105590"
    HorizSync 30.0-85.0
    VertRefresh 50.0-120.0

    # Sony Vaio C1(X,XS,VE,VN)?
    # 1024x480 @ 85.6 Hz, 48 kHz hsync
    ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync

    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616

    # This is a set of standard mode timings. Modes that are out of monitor spec
    # are automatically deleted by the server (provided the HorizSync and
    # VertRefresh lines are correct), so there's no immediate need to
    # delete mode timings (unless particular mode timings don't work on your
    # monitor). With these modes, the best standard mode that your monitor
    # and video card can support for a given resolution is automatically
    # used.

    # 640x400 @ 70 Hz, 31.5 kHz hsync
    ModeLine "640x400" 25.175 640 664 760 800 400 409 411 450

    # 640x480 @ 60 Hz, 31.5 kHz hsync
    ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525

    # 800x600 @ 56 Hz, 35.15 kHz hsync
    ModeLine "800x600" 36 800 824 896 1024 600 601 603 625

    # 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
    ModeLine "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace

    # 640x400 @ 85 Hz, 37.86 kHz hsync
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync

    # 640x480 @ 75 Hz, 37.50 kHz hsync
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync

    # 800x600 @ 60 Hz, 37.8 kHz hsync
    ModeLine "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync

    # 640x480 @ 85 Hz, 43.27 kHz hsync
    ModeLine "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync

    # 1152x864 @ 89 Hz interlaced, 44 kHz hsync
    ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace

    # 800x600 @ 72 Hz, 48.0 kHz hsync
    ModeLine "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync

    # 1024x768 @ 60 Hz, 48.4 kHz hsync
    ModeLine "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync

    # 640x480 @ 100 Hz, 53.01 kHz hsync
    ModeLine "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync

    # 1152x864 @ 60 Hz, 53.5 kHz hsync
    ModeLine "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync

    # 800x600 @ 85 Hz, 55.84 kHz hsync
    ModeLine "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync

    # 1024x768 @ 70 Hz, 56.5 kHz hsync
    ModeLine "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync

    # 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
    ModeLine "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace

    # 800x600 @ 100 Hz, 64.02 kHz hsync
    ModeLine "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync

    # 1024x768 @ 76 Hz, 62.5 kHz hsync
    ModeLine "1024x768" 85 1024 1032 1152 1360 768 784 787 823

    # 1152x864 @ 70 Hz, 62.4 kHz hsync
    ModeLine "1152x864" 92 1152 1208 1368 1474 864 865 875 895

    # 1280x1024 @ 61 Hz, 64.2 kHz hsync
    ModeLine "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054

    # 1400x1050 @ 60 Hz, 65.5 kHz
    ModeLine "1400x1050" 122.0 1400 1488 1640 1880 1050 1052 1064 1082 +HSync +VSync

    # 1024x768 @ 85 Hz, 70.24 kHz hsync
    ModeLine "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync

    # 1152x864 @ 78 Hz, 70.8 kHz hsync
    ModeLine "1152x864" 110 1152 1240 1324 1552 864 864 876 908

    # 1280x1024 @ 70 Hz, 74.59 kHz hsync
    ModeLine "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync

    # 1600x1200 @ 60Hz, 75.00 kHz hsync
    ModeLine "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync

    # 1152x864 @ 84 Hz, 76.0 kHz hsync
    ModeLine "1152x864" 135 1152 1464 1592 1776 864 864 876 908

    # 1280x1024 @ 75 Hz, 79.98 kHz hsync
    ModeLine "1280x1024" 135 1280 1296 1440 1688 1024 1025 1028 1066 +HSync +VSync

    # 1024x768 @ 100Hz, 80.21 kHz hsync
    ModeLine "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync

    # 1400x1050 @ 75 Hz, 82.2 kHz hsync
    ModeLine "1400x1050" 155.8 1400 1464 1784 1912 1050 1052 1064 1090 +HSync +VSync

    # 1600x1200 @ 70 Hz, 87.50 kHz hsync
    ModeLine "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync

    # 1152x864 @ 100 Hz, 89.62 kHz hsync
    ModeLine "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync

    # 1280x1024 @ 85 Hz, 91.15 kHz hsync
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync

    # 1600x1200 @ 75 Hz, 93.75 kHz hsync
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync

    # 1600x1200 @ 85 Hz, 105.77 kHz hsync
    ModeLine "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync

    # 1600x1200 @ 85 Hz, 106.3 kHz hsync
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync

    # 1280x1024 @ 100 Hz, 107.16 kHz hsync
    ModeLine "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync

    # 1800x1440 @ 64Hz, 96.15 kHz hsync
    ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync

    # 1800x1440 @ 70Hz, 104.52 kHz hsync
    ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync

    # 1920x1440 @ 60 Hz, 90.0 kHz hsync
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -HSync +VSync

    # 1920x1440 @ 75 Hz, 112.5kHz hsync
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -HSync +VSync

    # 512x384 @ 78 Hz, 31.50 kHz hsync
    ModeLine "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync

    # 512x384 @ 85 Hz, 34.38 kHz hsync
    ModeLine "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync

    # Low-res Doublescan modes
    # If your chipset does not support doublescan, you get a 'squashed'
    # resolution like 320x400.

    # 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
    ModeLine "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan

    # 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
    ModeLine "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan

    # 320x240 @ 72 Hz, 36.5 kHz hsync
    ModeLine "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan

    # 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
    ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan

    # 400x300 @ 60 Hz, 37.8 kHz hsync
    ModeLine "400x300" 20 400 416 480 528 300 301 303 314 Doublescan

    # 400x300 @ 72 Hz, 48.0 kHz hsync
    ModeLine "400x300" 25 400 424 488 520 300 319 322 333 Doublescan

    # 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
    ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan

    # 480x300 @ 60 Hz, 37.8 kHz hsync
    ModeLine "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan

    # 480x300 @ 63 Hz, 39.6 kHz hsync
    ModeLine "480x300" 25 480 496 576 632 300 301 303 314 Doublescan

    # 480x300 @ 72 Hz, 48.0 kHz hsync
    ModeLine "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan
    EndSection

    Section "Device"
    Identifier "device1"
    BoardName "S3 Trio3D/2X"
    Option "power_saver"
    # Option "no_accel" # You may enable this if there are timeouts when starting X
    EndSection

    Section "Screen"
    Driver "svga"
    Device "device1"
    Monitor "monitor1"
    DefaultColorDepth 32

    Subsection "Display"
    Depth 8
    Modes "640x480"
    EndSubsection

    Subsection "Display"
    Depth 15
    Modes "640x480"
    EndSubsection

    Subsection "Display"
    Depth 16
    Modes "640x480"
    EndSubsection

    Subsection "Display"
    Depth 24
    Modes "640x480"
    EndSubsection

    Subsection "Display"
    Depth 32
    Modes "640x480"
    EndSubsection
    EndSection
    # **********************************************************************
    # ServerLayout sections.
    # **********************************************************************

    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.

    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"

    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.

    Screen "Screen 1"
    EndSection
    # File generated by xf86config.

    #
    # Copyright © 1999 by The XFree86 Project, Inc.
    #
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    #
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    #
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    #
    # Except as contained in this notice, the name of the XFree86 Project shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from the
    # XFree86 Project.
    #

    # **********************************************************************
    # Refer to the XF86Config(4/5) man page for details about the format of
    # this file.
    # **********************************************************************

    # **********************************************************************
    # Module section – this section is used to specify
    # which dynamically loadable modules to load.
    # **********************************************************************
    #

    Section "Module"
    # This loads the DBE extension module.

    Load "dbe" # Double buffer extension

    # This loads the Type1 and FreeType font modules
    Load "type1"
    Load "speedo"

    # Load "freetype"
    # Load "xtt"

    # This loads the GLX module
    # Load "glx"
    # This loads the DRI module
    # Load "dri"

    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.

    Subsection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubsection
    EndSection
    # **********************************************************************
    # Files section. This allows default font and rgb paths to be set
    # **********************************************************************

    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.

    RgbPath "/usr/X11R6/lib/X11
    gb"

    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    #
    # If you don't have a floating point coprocessor and emacs, Mosaic or other
    # programs take long to start up, try moving the Type1 and Speedo directory
    # to the end of this list (or comment them out).
    #

    # FontPath "/usr/X11R6/lib/X11/fonts/local/"
    FontPath "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1/"

    # FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
    # FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.

    # ModulePath "/usr/X11R6/lib/modules"
    EndSection
    # **********************************************************************
    # Server flags section.
    # **********************************************************************

    Section "ServerFlags"
    EndSection
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging

    # Option "NoTrapSignals"

    # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.

    # Option "DontVTSwitch"

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.

    # Option "DontZap"

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.

    # Option "Dont Zoom"

    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.

    # Option "DisableVidModeExtension"

    # Uncomment this to enable the use of a non-local xvidtune client.

    # Option "AllowNonLocalXvidtune"

    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.

    # Option "DisableModInDev"

    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).

    # Option "AllowNonLocalModInDev"
    # **********************************************************************
    # Input devices
    # **********************************************************************

    # **********************************************************************
    # Core keyboard's InputDevice section
    # **********************************************************************

    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "Keyboard"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "nl"

    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.

    # Option "Protocol" "Xqueue"

    Option "AutoRepeat" "500 30"

    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"

    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"

    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc102"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"

    # These are the default XKB settings for XFree86
    # Option "XkbRules" "xfree86"
    # Option "XkbModel" "pc101"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""

    # Option "XkbDisable"

    Option "XkbRules" "xfree86"
    EndSection
    # **********************************************************************
    # Core Pointer's InputDevice section
    # **********************************************************************

    Section "InputDevice"
    # Identifier and driver

    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "PS/2"
    Option "Device" "/dev/mouse"

    # Mouse-speed setting for PS/2 mouse.

    # Option "Resolution" "256"

    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.

    # Option "Protocol" "Xqueue"

    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.

    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"

    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"

    # ChordMiddle is an option for some 3-button Logitech mice

    # Option "ChordMiddle"
    EndSection

    Section "Monitor"
    Identifier "monitor1"
    VendorName "Belinea"
    ModelName "Belinea 105590"
    HorizSync 30.0-85.0
    VertRefresh 50.0-120.0

    # Sony Vaio C1(X,XS,VE,VN)?
    # 1024x480 @ 85.6 Hz, 48 kHz hsync
    ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync

    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616

    # This is a set of standard mode timings. Modes that are out of monitor spec
    # are automatically deleted by the server (provided the HorizSync and
    # VertRefresh lines are correct), so there's no immediate need to
    # delete mode timings (unless particular mode timings don't work on your
    # monitor). With these modes, the best standard mode that your monitor
    # and video card can support for a given resolution is automatically
    # used.

    # 640x400 @ 70 Hz, 31.5 kHz hsync
    ModeLine "640x400" 25.175 640 664 760 800 400 409 411 450

    # 640x480 @ 60 Hz, 31.5 kHz hsync
    ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525

    # 800x600 @ 56 Hz, 35.15 kHz hsync
    ModeLine "800x600" 36 800 824 896 1024 600 601 603 625

    # 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
    ModeLine "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace

    # 640x400 @ 85 Hz, 37.86 kHz hsync
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync

    # 640x480 @ 75 Hz, 37.50 kHz hsync
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync

    # 800x600 @ 60 Hz, 37.8 kHz hsync
    ModeLine "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync

    # 640x480 @ 85 Hz, 43.27 kHz hsync
    ModeLine "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync

    # 1152x864 @ 89 Hz interlaced, 44 kHz hsync
    ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace

    # 800x600 @ 72 Hz, 48.0 kHz hsync
    ModeLine "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync

    # 1024x768 @ 60 Hz, 48.4 kHz hsync
    ModeLine "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync

    # 640x480 @ 100 Hz, 53.01 kHz hsync
    ModeLine "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync

    # 1152x864 @ 60 Hz, 53.5 kHz hsync
    ModeLine "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync

    # 800x600 @ 85 Hz, 55.84 kHz hsync
    ModeLine "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync

    # 1024x768 @ 70 Hz, 56.5 kHz hsync
    ModeLine "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync

    # 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
    ModeLine "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace

    # 800x600 @ 100 Hz, 64.02 kHz hsync
    ModeLine "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync

    # 1024x768 @ 76 Hz, 62.5 kHz hsync
    ModeLine "1024x768" 85 1024 1032 1152 1360 768 784 787 823

    # 1152x864 @ 70 Hz, 62.4 kHz hsync
    ModeLine "1152x864" 92 1152 1208 1368 1474 864 865 875 895

    # 1280x1024 @ 61 Hz, 64.2 kHz hsync
    ModeLine "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054

    # 1400x1050 @ 60 Hz, 65.5 kHz
    ModeLine "1400x1050" 122.0 1400 1488 1640 1880 1050 1052 1064 1082 +HSync +VSync

    # 1024x768 @ 85 Hz, 70.24 kHz hsync
    ModeLine "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync

    # 1152x864 @ 78 Hz, 70.8 kHz hsync
    ModeLine "1152x864" 110 1152 1240 1324 1552 864 864 876 908

    # 1280x1024 @ 70 Hz, 74.59 kHz hsync
    ModeLine "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync

    # 1600x1200 @ 60Hz, 75.00 kHz hsync
    ModeLine "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync

    # 1152x864 @ 84 Hz, 76.0 kHz hsync
    ModeLine "1152x864" 135 1152 1464 1592 1776 864 864 876 908

    # 1280x1024 @ 75 Hz, 79.98 kHz hsync
    ModeLine "1280x1024" 135 1280 1296 1440 1688 1024 1025 1028 1066 +HSync +VSync

    # 1024x768 @ 100Hz, 80.21 kHz hsync
    ModeLine "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync

    # 1400x1050 @ 75 Hz, 82.2 kHz hsync
    ModeLine "1400x1050" 155.8 1400 1464 1784 1912 1050 1052 1064 1090 +HSync +VSync

    # 1600x1200 @ 70 Hz, 87.50 kHz hsync
    ModeLine "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync

    # 1152x864 @ 100 Hz, 89.62 kHz hsync
    ModeLine "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync

    # 1280x1024 @ 85 Hz, 91.15 kHz hsync
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync

    # 1600x1200 @ 75 Hz, 93.75 kHz hsync
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync

    # 1600x1200 @ 85 Hz, 105.77 kHz hsync
    ModeLine "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync

    # 1600x1200 @ 85 Hz, 106.3 kHz hsync
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync

    # 1280x1024 @ 100 Hz, 107.16 kHz hsync
    ModeLine "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync

    # 1800x1440 @ 64Hz, 96.15 kHz hsync
    ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync

    # 1800x1440 @ 70Hz, 104.52 kHz hsync
    ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync

    # 1920x1440 @ 60 Hz, 90.0 kHz hsync
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -HSync +VSync

    # 1920x1440 @ 75 Hz, 112.5kHz hsync
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -HSync +VSync

    # 512x384 @ 78 Hz, 31.50 kHz hsync
    ModeLine "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync

    # 512x384 @ 85 Hz, 34.38 kHz hsync
    ModeLine "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync

    # Low-res Doublescan modes
    # If your chipset does not support doublescan, you get a 'squashed'
    # resolution like 320x400.

    # 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
    ModeLine "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan

    # 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
    ModeLine "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan

    # 320x240 @ 72 Hz, 36.5 kHz hsync
    ModeLine "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan

    # 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
    ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan

    # 400x300 @ 60 Hz, 37.8 kHz hsync
    ModeLine "400x300" 20 400 416 480 528 300 301 303 314 Doublescan

    # 400x300 @ 72 Hz, 48.0 kHz hsync
    ModeLine "400x300" 25 400 424 488 520 300 319 322 333 Doublescan

    # 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
    ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan

    # 480x300 @ 60 Hz, 37.8 kHz hsync
    ModeLine "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan

    # 480x300 @ 63 Hz, 39.6 kHz hsync
    ModeLine "480x300" 25 480 496 576 632 300 301 303 314 Doublescan

    # 480x300 @ 72 Hz, 48.0 kHz hsync
    ModeLine "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan
    EndSection

    Section "Device"
    Identifier "device1"
    BoardName "S3 Trio3D/2X"
    Option "power_saver"
    # Option "no_accel" # You may enable this if there are timeouts when starting X
    EndSection

    Section "Screen"
    Driver "svga"
    Device "device1"
    Monitor "monitor1"
    DefaultColorDepth 32

    Subsection "Display"
    Depth 8
    Modes "640x480"
    EndSubsection

    Subsection "Display"
    Depth 15
    Modes "640x480"
    EndSubsection

    Subsection "Display"
    Depth 16
    Modes "640x480"
    EndSubsection

    Subsection "Display"
    Depth 24
    Modes "640x480"
    EndSubsection

    Subsection "Display"
    Depth 32
    Modes "640x480"
    EndSubsection
    EndSection
    # **********************************************************************
    # ServerLayout sections.
    # **********************************************************************

    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.

    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"

    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.

    Screen "Screen 1"
    EndSection

    Boyo


  • [quote:2eef55fb0d="maximilaan"]Verder heet het bestand geen XF86Config:61, maar XF86Config[/quote:2eef55fb0d] De foutmelding verwijst dan wel naar /etc/X11/XF86Config maar is dat wel de goede config bestand? Dat is te controleren in /var/log/XFree86.0.log
    Bij mij staat hier in Mandrake 9.1
    [code:1:2eef55fb0d]
    (==) Using config file: "/etc/X11/XF86Config-4"
    [/code:1:2eef55fb0d] Wellicht staat er in die /var/log/XFree86.0.log nog wat meer info over die foutmelding.
    En verder zou er na het configureren met XFdrake, zoals ik adviseerde, dan zou dit bovenaan moeten staan in /etc/X11/XF86Config of /etc/X11/XF86Config-4
    [code:1:2eef55fb0d]# File generated by XFdrake.[/code:1:2eef55fb0d]
  • Hoe heb je dat op het forum gekregen??? Over getiept mag ik niet hopen ??
  • kijk maar iets boven dat grote bericht daar staat hoe je iets op floppy zet en dan in windows leest dan is het gewoon kopieren plakken ctr c ctr v

    Boyo
  • [quote:e67d20bb63]Dat is te controleren in /var/log/XFree86.0.log [/quote:e67d20bb63]
    hoe kan ik dat dan lezen?
    # more /var/log/XFree86.0.log ofzo iets

    Boyo
  • woont er mischien iemand in de buurt van njimegen die mijn computer kan maken want ik ben ten einde raad

    Boyo
  • [quote:7fa99650a0="Boyo"][quote:7fa99650a0] Dat is te controleren in /var/log/XFree86.0.log[/quote:7fa99650a0] hoe kan ik dat dan lezen?
    # more /var/log/XFree86.0.log ofzo iets [/quote:7fa99650a0] Inderdaad, of met [code:1:7fa99650a0] vi /var/log/XFree86.0.log [/code:1:7fa99650a0] of net zoals die /etc/X11/XF86Config kopieren naar een diskette.
  • oke ik ga dat nu ff doen


    Boyo
  • dat lukt niet als ik dat doe krijg ik een programma waarin ik kan typen
    en er staat niks ik kan het ook niet op floppy zetten
    wat nu?

    Boyo

Beantwoord deze vraag

Dit is een gearchiveerde pagina. Antwoorden is niet meer mogelijk.